add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube

Comments

Comments

Comment reply on Forum Topic "Screws for Push pull configuration"

  • 3 months ago
  • 1 point

Yea, those are 30mm length which should be the correct width.

Comment reply on Forum Topic "Screws for Push pull configuration"

  • 3 months ago
  • 1 point

Manual at https://dlcdnets.asus.com/pub/ASUS/Accessory/ROG_AREION-10G/Q14088_ROG_RYUJIN_240_360_QSG_WEB.pdf says 6-32 thread size at 30mm length (usually translates to 1.25 inch). The fans look like standard 25mm thick (same as what comes with it).

Something like the following:

Watch the depth of the screw as you screw the fan down to ensure it doesn't go into the radiator core. You usually have a couple mm of wiggle room. But longer screws (like 1.75 inch) would likely go into the fins and then into the radiator core.

Comment reply on Forum Topic "water cooler help"

  • 4 months ago
  • 1 point

Here is a build using that case and the H100i Pro. It appears to be the same dimensions as the H100x so seems it should fit fine.

https://pcpartpicker.com/b/FKtgXL

Comment reply on Forum Topic "Quiet RGB (or white) Fans"

  • 4 months ago
  • 1 point

If you are happy with the ASRock software it looks like they support a decent amount of aRGB products according to https://www.asrock.com/microsite/PolychromeRGB/. One idea would be to go with an aRGB splitter like https://www.coolermaster.com/catalog/coolers/rgb-accessories/argb-1-to-5-splitter-cable/ from the motherboard paired with some https://www.coolermaster.com/catalog/coolers/case-fan/masterfan-mf140r-argb/ (which also come in 120mm). I couldn't comment on the noise level though (haven't used these personally).

Though, it looks like the mounting on these use rubber pads which would dampen any vibration noise through the case. I have used fans with the vibration damping (Corsair LL) and it definitely helps a bit if the noise is due to vibration instead of just rushing air.

Comment reply on Forum Topic "Quiet RGB (or white) Fans"

  • 5 months ago
  • 1 point

When you go addressable RGB fans it usually means you buy into their ecosystem / software. So, sometimes the software used may have a influence on choice (Corsair iCUE, NZXT CAM, Thermaltake TT), especially if you are already using one for something else (like if you had Corsair RGB memory you might want Corsair fans so you can stay with just iCUE).

That said, some questions to help narrow down:

  • What Fractal Designs case? Did it come with any kind of fan controller?
  • Does your motherboard have any RGB or aRGB headers for controlling RGB lighting?
  • Do you have any other RGB lighting software already being used?
  • How are the fans currently hooked up / powered? If motherboard, are you using any software to control the PWM speed?

I've only personally used Corsair and Thermaltake RGB fans and didn't like the Thermaltake software at all. They were changing fan speeds based on CPU load and any little CPU spike would spin the fans up and down quickly which was really annoying to listen to.

Comment reply on Forum Topic "i need help building a 1080p or 1440p 144 hz gaming pc for around $600-$1000 but preferably on the lower side"

  • 5 months ago
  • 1 point

Cool. I think $1000 for high quality settings in a lot of AAA titles is tough but doable at 1440p 144hz. You really want the games to run close to 144 FPS to really take advantage of the monitor.

I more or less agree with the suggestions below. I think your real bottleneck is the GPU. Recommendations in this post look like they jump on the RX 5700 (likely to stay within budget). If you can increase your budget by another couple hundred or so it would put you into the next tier GPU (like a 2060 or 2070 Super) to get closer to 144 FPS targets.

Comment reply on Forum Topic "Pump and res questionsss"

  • 5 months ago
  • 1 point

Yes, it is explained on the page you linked. You need two additional parts:

The top of this combo unit can be used as an inlet by adding the EK-RES X3 - Multiport TOP and an EK-RES X3 - Internal Tube with the corresponding length to your reservoir size. The Internal Tube is important to prevent the splashing sound of the coolant inside the reservoir and to prevent coolant foaming. It is recommended that the end of the internal inlet tube is submerged in coolant.

Comment reply on Forum Topic "filling up waterloop"

  • 5 months ago
  • 1 point
  • How long did you let it run?
  • Is the pump running at 100% PWM?
  • What pump is it?

It almost looks like the pump isn't strong enough or maybe some other obstruction. But it definitely can take a while for things to settle. I recently flushed my loop and it took about an hour or two after for air pockets and bubbles to go away.

Comment reply on Forum Topic "Where to position the Corsair h60"

  • 5 months ago
  • 1 point

It looks like that case has room up top for 2 x 120. If that is true and assuming the front case fans are also intake I would place it in one of the top case spots with the fan set to intake from top.

My reasoning for this is because the H60 is a 120 sized radiator and it is going to need as much help as it can get. Exhausting the warmer inside case air through the radiator out the rear will likely be worse performance than intake fresh from up top.

You might be able to place it at the rear and intake from the rear and intake front. But you would probably want some exhaust fans up top as this creates a lesser optimal airflow pattern.

This would also probably depend a bit on CPU / GPU combo. Intake for the radiator from outside will be better for CPU but probably worse for GPU (the warmed air from the radiator is now in the case).

Comment reply on Forum Topic "2700x stock cooler won't change color"

  • 5 months ago
  • 1 point

Can you explain how you have it hooked up? USB or RGB? Which software are you using to control it?

Comment reply on Forum Topic "i need help building a 1080p or 1440p 144 hz gaming pc for around $600-$1000 but preferably on the lower side"

  • 5 months ago
  • 1 point

The title says "1080p or 1440p 144 hz" but you say in description you already have the monitor. What monitor is it?

Comment reply on andyshinn's Completed Build: Mr. Freeze

  • 8 months ago
  • 1 point

Hard to say as I never really paid much attention to the differences. I'd say they are the same for a given RPM. However, they were louder because I had no control over the RPM fluctuations due to their software. The major change in noise is that I can keep them at a constant low speed and ramp up on a curve based on exhaust temperatures from the Aquaero instead of CPU usage.

The Thermaltake TT fans have a custom connector and only work with their controller and software.

Comment reply on andyshinn's Completed Build: Mr. Freeze

  • 8 months ago
  • 1 point

They seem fine but I don't run my computer 24/7. I turn it off when I am not using it so my total fan time is likely a lot less than most.

Comment reply on wrx_guy's Completed Build: beach/surf inspired build/set up

  • 8 months ago
  • 1 point

Hey, what happened to your PC-O11D build? I was just looking to reference your white fans from that build and it disappeared!

Comment reply on Forum Topic "What fans to use for a White Lian Li PC-O11 Dynamic Case"

  • 8 months ago
  • 2 points

To clarify, you are looking for White framed RGB fans? If so maybe edit the title to clarify.

Sorry I cannot help though. I was on a quest for white framed RGB fans myself and came up empty when I built my PC-O11D. But I'll be following to see what you come up with!

Comment reply on Forum Topic "[Part Addition] Lian Li O-11 Dynamic XL case"

  • 8 months ago
  • 1 point

Shouldn't The part numbers be PC-O11DXL-X and PC-O11DXL-WS?

Comment reply on timjr's Completed Build: Case Labs SMA8 Rev. 2 Frame Ripper

  • 12 months ago
  • 1 point

I totally missed out on the Caselabs era. The SMA8 with dual chamber setup seems like such an amazing case for water cooling enthusiasts.

Comment reply on Forum Topic "How do Cases with RGB Fans and other parts work?"

  • 13 months ago
  • 2 points

Do I need to plug the fan's RGB connector or whatever and the hex shape's RGB connector into separate headers, or does something like a bundled connector come with the case?

The product sheet claims the 3-way splitter is included:

1 to 3 Splitter Cable for RGB LED Fans: The RGB Connector Splitter and 4 pin male to male adapters are included.

This would allow you to use the motherboard RGB header to control the color. However, each "zone" will always be the same color in this case. These are not addressable RGB LEDs.

Also, the Cooler Master A-RGB Controller won't work with the included fans as they are not addressable RGB (ARGB). You'd want the regular RGB controller (http://www.coolermaster.com/cooling/cooling-rgb-accessories/rgb-led-controller/) to do this. You would use the Cooler Master MasterPlus+ software to control the color of each port.

Comment reply on Forum Topic "How to connect 6 rgb case fans to 570x"

  • 13 months ago
  • 1 point

Can I just get a y splitter and power 2 fans per MOBO fan header?

Yes, you can do this. They are 4 pin PWM fans. If you use a 2-way or 3-way splitter then the motherboard will send the PWM signal to all 3 fans. But keep in mind the motherboard will only see the RPM for 1 of the fans (usually labeled on the splitter which one has the signal wire).

Would this half the power or rpm to each fan because of the splitter?

Nope, the PWM signal is what controls the fan speed. All the fans should get 12 volts.

Or do I need a fan controller like the Corsair commander pro?

This is something optional you can add, and would allow you to control fan speeds in addition to the RGB in the same Corsair iCUE software. However, there are only 4 fan PWM ports on Commander Pro. You would still need a splitter or two.

The only thing that can be an issue is the amount of current the fans will draw on a single motherboard header. Usually, a motherboard header is rated for some amount (for example, 15 watts) and fans will have a maximum rated draw (such as 5 watts). In my example, you wouldn't want to run more than 3 fans on one header as it could pull more than the rated header current and possibly burn out something. In my experience 2 or 3 fans per header is fine.

Comment reply on Forum Topic "Lighting Node Pro vs Commander Pro"

  • 13 months ago
  • 1 point

One of the RGB ports goes to the RGB hub which will power the RGB for 6 fans. But if you want to control the fan PWM as well you'd need at least 1 x 3-way or 2 x 2-way PWM splitters as the Commander Pro only has 4 PWM fan headers. You could always do 4 fans on the Commander Pro PWM and 2 on motherboard headers.

The RGB strips can be chained together (I think up to 4 strips) on the other RGB ports of the Commander Pro.

Comment reply on Forum Topic "Lighting Node Pro vs Commander Pro"

  • 13 months ago
  • 1 point

Yep, you could do that.

Comment reply on Forum Topic "Lighting Node Pro vs Commander Pro"

  • 13 months ago
  • 1 point

The Commander Pro includes the functionality of the Lighting Node Pro (the 2 RGB hub / strip connections). The Commander Pro adds some fan, sensor, and USB headers. You'd still need the RGB hub (which all the fans RGB connect to) with either.

The 3-packs of the ML or LL fans come with the Lighting Node Pro and 6 port RGB hub. In this scenario, you would run the PWM from motherboard headers and RGB to the hub.

Comment reply on andyshinn's Completed Build: Mr. Freeze

  • 13 months ago
  • 1 point

I don't think I will re-do the tubing in this chassis. I'm waiting for a newer dual-chamber chassis to come out where I can separate the radiator completely (the closest I can find to what I want is the Parvum L1.0). Then I might move to hard tubing or just build a new machine.

There are definitely a lot of good hard tubing builds in this chassis around and they do look amazing! I just didn't think it was a good idea to try hard tubing for first time custom loop.

Comment reply on Forum Topic "in-ear + mic headphones"

  • 13 months ago
  • 1 point

have you found there to be a good site to filter, and find headphones like this?

Maybe something like https://www.head-fi.org/. I usually just go with what looks like it works well. Particularly, I really like the bose "StayHear" style tips that hook into the ear. I don't know others that have this design. I've been using these style Bose for a while and keep coming back to them.

what's the purpose or use of this thing? is it needed?

The headphones are a 4-pole connector which usually doesn't work in a computer soundcard. The ports on the computer are going to have one for mic input and one for audio output. The splitter separates the single connector of the headphones so that the mic and audio are separate and can be plugged into the mic and audio ports of the soundcard. It isn't needed on devices like phones because they natively support 4-pole 3.5mm connectors. The Bose headphones don't come with this splitter.

what's the purpose or use of this thing? is it needed?

No, it isn't strictly needed if the headphones will reach the ports of the computer. But on my machine the Bose headphone cable with the splitter isn't long enough to reach all the way to the back of my computer.

Comment reply on Forum Topic "in-ear + mic headphones"

  • 13 months ago
  • 1 point

Is this a question? I'm assuming you are asking for recommendations for this combination...

I run this setup and like it a lot:

The splitter separates the mic and headphones into separate plugs that go right into the mic and audio jacks on the back of my computer. Then I have a 4-pole extension on the splitter that lays on the desk next to my keyboard where I can plug the SoundSport into the extension.

I've also run this setup on my previous computer without the extension by just going into the splitter on front panel mic / headphone jacks. But the SoundSport cable isn't that long and it is nice to have an extra 3 feet or more to run the cable somewhere comfortably out of the way.

The mic works well and surprisingly seems to have similar or less background noise than my friends gaming headsets. It works well in Discord activating with my voice but doesn't pick up my keyboard or other on-desk noises.

Comment reply on Forum Topic "Looking for a specific case"

  • 13 months ago
  • 1 point

You might have to look for older / used to get the 3 x 5.25 slots. Older cases that would satisfy a dual-chamber with 3 x 5.25 would be:

  • Caselabs SMA8 (hard to find, was a modular front option)
  • Corsair 900D
  • Silverstone TJ07
  • Silverstone TJ11

The only current cases I can think of that have 3 or more 5.25 are the Thermaltake cubes. If you haven't already, check out the Thermaltake X5 and X9. Both sort-of dual chamber with 3 x 5.25. You might also look at more boutique custom shops for something like the Mountain Mods U2-UFO or LD PC-V8.

Comment reply on Forum Topic "Kraken x72 on Corsair Crystal 460x"

  • 13 months ago
  • 2 points

Here are two builds that appear to use it in the front without issue:

Based on their photos it looks like the next limiters are going to be the GPU and PSU shroud length.

Comment reply on Forum Topic "Monitor Hurting Eyes"

  • 13 months ago
  • 1 point

I have two S2716DG and both of them are grossly bright with the factory settings. I don't have it in front of me but I think i have the brightness now set under 25%. If you haven't tried adjusting the settings I would check out some Amazon reviews which have some good starting settings for this monitor.

Another thing I have been doing lately (which is a very user preference thing) is running Night Light (and Night Shift on my Mac) 24/7. Yea, your colors are going to be all wrong. But it helps with eye strain a bunch.

Comment reply on demmelha's Completed Build: All Asus RoGBs

  • 14 months ago
  • 1 point

It's a shame there are not more cases that have a separate radiator chamber design. For my next build I want to separate radiator intake and exhaust from everything else. It seems like the list is currently limited to:

  • Thermaltake X71
  • Parvum L1.0
  • Corsair 900D (discontinued, no longer found)
  • Caselabs SMA8 (now defunct, no longer found)
  • Lian Li V3000

I'd love to see a more mainstream design like the Parvum specifically for water cooling.

Comment reply on demmelha's Completed Build: All Asus RoGBs

  • 14 months ago
  • 2 points

I'm liking the external radiator idea.

Comment reply on Forum Topic "Advantage NVMe...for all storage?"

  • 14 months ago
  • 1 point

If that is how you like to rationalize spending money that is fine. I run everything off a single 1 TB 970 Pro because I want speed and don't want to deal with multiple drives. If you are not worried about the cost I would just run a single NVMe drive and avoid having to deal with two drives.

The performance of 1 vs 2 NVMe drives isn't going to be noticeable if you are still loading applications or files all from 1 drive at a time. The only difference here would be if you were running some sort of RAID 0 (striping) or RAID 1 (potential 2x read performance?).

In applications where you have work that you don't want to lose, I'd run a second drive (such as a larger HDD) that is just used for backup. Even then I'd probably prefer this drive to be external so that it can move around and not necessarily need to be connected to the computer all the time (ie. backup every once in a while and then store the drive in a safe place).

Comment reply on babyman1737's Completed Build: P3 Snow White build

  • 14 months ago
  • 9 points

I sense a theme in this room...

Comment reply on kevdogger's Completed Build: pfSense Router Build

  • 14 months ago
  • 1 point

Pretty neat. I had never heard of xcp-ng. I've done a lot of ESX and XenServer in the past but xcp-ng looks like a free alternative.

Comment reply on Forum Topic "Snap ring pliers for fan clip?"

  • 14 months ago
  • 1 point

I ended up using the pliers in combination with some special tweezers for small parts. I did manage to get the ring off safely. However, the rest of the fan has a bunch of press-fit and melted plastic parts to hold it together. I couldn't modify what I needed to without breaking the fan :(

Comment reply on Forum Topic "First pc. Questions about rgb."

  • 14 months ago
  • 1 point

I'll assume you are talking about the MasterFan Pro Air Balance RGB (if not, please specify what actual fans you are using).

It looks like these fans use the standard 12V G R B pinout. In that case, you could just use the headers on your motherboard. If you have more fans than headers you can pickup a RGB splitter cable such as http://www.coolermaster.com/cooling/cooling-rgb-accessories/1-to-3-rgb-splitter-cable/

The only place I could actually find any information on the Lian Li RGB hub was at http://forum.corsair.com/v3/showthread.php?t=182462. The connectors look like 3 pin which usually means they are addressable LED instead of the standard single color RGB. Short answer is "no", you cannot use the Lian Li hub in this case.

The ML240 AIO appears to come with MF120R RGB fans. These fans are addressable RGB which would be separate as well. You'll need to use either the included controller or a addressable RGB splitter which can translate the regular RGB to it such as http://www.coolermaster.com/cooling/cooling-rgb-accessories/argb-1-to-3-splitter-cable/

Comment reply on Forum Topic "9 fans Corsiar ll120"

  • 14 months ago
  • 2 points

On the fan PWM side you would need at least 2 x 3-way splitters. This would let you create some groups of fans on a single channel (for example, if you had 3 fans on a radiator you might just consider them all 1 channel):

  • 1 fan channel for a group of 2 or 3 fans
  • 1 fan channel for another group of 2 or 3 fans
  • 4 channels for 4 individual fans

On the RGB side you will need at least two 3-pack of LL fans that come with the RGB hub. Then you would:

  • Connect 4 fans to one RGB hub
  • Connect 5 fans to the other RGB hub
  • Connect each of the RGB hubs to SATA power
  • Connect each of the RGB hubs to the commander pro 2 LED ports

Hope this gives you some ideas.

Comment reply on Anonymous11985's Completed Build: Lian Li Custom Water Cooled PC

  • 14 months ago
  • 2 points

I love the loop in the PC-Q37. Do you have any photos showing the case with panels on in full frame? All of your photos seem to be of close-up shots or the glass is off.

Comment reply on TheToon's Completed Build: Ncase M1 Mini-ITX Custom Loop

  • 14 months ago
  • 1 point

Those are pretty damn good numbers given the size of this build.

Comment reply on TheToon's Completed Build: Ncase M1 Mini-ITX Custom Loop

  • 14 months ago
  • 1 point

Would like to see the GPU and CPU temps after 15 minutes stress testing.

Comment reply on wrx_guy's Completed Build: MUCH NEEDED UPGRADES

  • 14 months ago
  • 3 points

I love the white fans in the PC-O11DW. I'm trying to figure out how to modify my existing EK Vardar EGB fans into a white Vardar chassis so I can have a similar look.

Comment reply on Forum Topic "Snap ring pliers for fan clip?"

  • 14 months ago
  • 1 point

I ended up getting some snap ring pliers with different sized tips. Unfortunately, the smallest sized tips are not small enough and I can't get both ends to fit in the small opening. Still looking for a way to get the ring off without destroying it :(

Comment reply on Forum Topic "Best looking cases?"

  • 14 months ago
  • 1 point

I just want to reiterate kylezobl last point a bit

it all depends on how you want your system to look.

If you buy for what other people like you are just going to get recommendations for every case out there. I would say the look of the case is subjective and that you should be getting one that looks good to you. After all, it will be sitting on your desk and you will be the one looking at it the most.

Which case looks best to you, the builder?

Comment reply on Forum Topic "Opinions on the phanteks enthoo pro in 2019"

  • 14 months ago
  • 1 point

I don't own any of these cases. But I have an opinion on why these could still be considered good buys 4-5 years after their releases:

  • The 750D was one of Corsairs top-of-the-line cases when it was released. The higher end cases are usually built a bit better with latest features and support for a wide range of peripherals which helps them stand up to time better.
  • Both the 750D and Enthoo Pro are full towers. Since full towers are larger they tend to favor more expensive builds such as custom loop water cooling. The extra space likely helps them stand up to time better.
  • 4-5 years ago we were not as obsessed with RGB and glass panels everywhere. A lot of the recent cases we are seeing with glass side and front panels are likely sacrificing cooling performance for looks. You might actually get better cooling performance out of the older full towers with mesh fronts.

Comment reply on andyshinn's Completed Build: Mr. Freeze

  • 14 months ago
  • 1 point

;)

Comment reply on 19seanak19's Completed Build: Aluminum Falcon

  • 14 months ago
  • 1 point

Do I spy a farbwerk in there?

Comment reply on Forum Topic "GALAX 2060"

  • 14 months ago
  • 1 point

Like others mentioned, it isn't very popular unless you are in their more target markets. If you are in Europe you may have better luck finding it under their KFA2 brand name (http://www.kfa2.com/).

Comment reply on warplane's Completed Build: Triton by World of Fred

  • 14 months ago
  • 2 points

Not sure why they didn't just link their existing build log and photos. I knew I'd seen this name before somewhere...

Comment reply on andyshinn's Completed Build: Mr. Freeze

  • 14 months ago
  • 1 point

I don't have that installed. But is your memory even in dual channel? I think each side needs 2 x sticks populated for the Threadripper per it's dual-die design. You may only be running single channel on each bank.

Comment reply on andyshinn's Completed Build: Mr. Freeze

  • 14 months ago
  • 1 point

It looks like your GPU and RAM are way underperforming. Here is a comparison UserBenchmark of my system: https://www.userbenchmark.com/UserRun/12550959

I would say, in general, this CPU is not a good for gaming. It does underperform in games like COD:BO4. But I easily hit my 144 FPS frame limiter in games like Battlefield V.

Sort

add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube