PCPartPicker

  • Log In
  • Register

Comments

SumtinWong88's Completed Build: Walnut Wall-E

Zambacan 1 Build 1 point 4 days ago

Well done looks great ..people obviously like the zen aesthetic..

Executablefiles's Completed Build: A Year's Hope

Zambacan 1 Build 2 points 15 days ago

Last till the end! That sounds a bit bleak. The end of what? You build the ultimate bang for buck pc! Well done.

Lobrac98's Completed Build: Casper

Zambacan 1 Build 2 points 15 days ago

looks good ...you could cable combs to tidy up the white cables

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 15 days ago

thanks.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 15 days ago

Thanks..I had orginally aimed for a bit more precision but it turned out well in the end.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 3 points 20 days ago

If it catches fire I'll tell you. It's got a water loop...so the pipes will melt and the water will extinguish the flames.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 20 days ago

I was aiming for a bit more precision but without more time, tools and materials I embraced a slightly organic shape which worked. It was a crazy amount of time...so couldn't be a commercial thing. Perhaps you can make one? Inwin was going to make a wooden case that looked interesting..Google "inwin wood case"

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 20 days ago

Thank you....hmmmmn what next?

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 20 days ago

thanks

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 20 days ago

Thanks. I had never bent tube before and the first ones were rubbish (I pretty much did every tube at least twice) and in the end they had just the right amount of wonkiness.

MEC-777's Completed Build: Rustic Rat Rod PC

Zambacan 1 Build 2 points 20 days ago

I saw this a while back and meant to comment. Usually when i say "hey kids...check this out" the are not interested. This build had me and my boys spellbound. Its brilliantly conceived and executed. Does it get used?

gthompson0912's Completed Build: Daydream Nation

Zambacan 1 Build 1 point 21 days ago

I meant to comment earlier. You have done such a brilliant job. I think the cables are the best I have ever seen. If a cable can be joyous then this is the one..and it contrasts so well with the rest of the build. Well done.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Thank you.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

After your comment I asked the kids if they learnt anything...there were a few smart Alec responses but essentially they said "no"!..oh well it's done now:)

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Thanks

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Thanks

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Thanks

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Sounds good.. I'm sure you'll do a great job.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 21 days ago

I see what you did there!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Yes I like your choices...and that case. This build uses same case and I love it https://uk.pcpartpicker.com/b/r6mqqs

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Thanks. There were actually a couple of other software steps to produce the 2d drawings (tinkercad and inkscape). I emailed drawings files to a company here in UK and they posted the cut plywood back. I'm sure similar services exist in other countries.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Pleased you like it.. thanks.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

Thanks

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

I haven't tested extensively it will get hotter..but water-cooling reduces temps significantly. Maybe you need to improve airflow in your case. 81 is toasty but still within acceptable limits.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 21 days ago

If you don't have any particular high end use case such as video editing and don't care about getting every last frame ...the 2600 is widely considered a great value overclockable all-rounder. However if you intend to use the stock cooler you might consider the 2600x it has a better cooler.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 21 days ago

Depends what you mean by value.. functionally its a moderately powerful compact pc. Water-cooling is hard to justify financially and in terms of hours well...for me it was fun project it's about the atheistic and challenge and it is valuable!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 22 days ago

thank you!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 22 days ago

thanks

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 22 days ago

Maybe its the start of something? Pleased you like it!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 22 days ago

im sure most dont know what we are talking about!

friku's Completed Build: Little Liquid Nightmare

Zambacan 1 Build 2 points 22 days ago

You really must have wanted to have a quiet PC!! I take your point on the soft tubing it looks great. I also appreciate your thrifty approach too many builds are a bit extravagant IMO. I confess I like the warmth of the final shot with a bit of colour. Whole thing is pretty awesome well done!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 23 days ago

Btw I admired your rage PC...only a proper modder trashes something on purpose!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 23 days ago

thank you.. i am

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 10 points 23 days ago

Yep it's all (cough) intentional :)

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 23 days ago

Thanks!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 23 days ago

True:).... But your 19 build's that's impressive!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 23 days ago

Not doubt there are some things there others can relate to. Appreciate your comment thank you

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 23 days ago

Thanks for that!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 1 point 23 days ago

thanks

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 3 points 23 days ago

Your comment made me smile!

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 6 points 23 days ago

You are kind thanks! Truely the ply shroud doesnt fit like a glove and my tube bending skills are noob level and the cables...well it's just not that kind of precision build. Net result is pleasing...

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 2 points 23 days ago

Thanks it was a fun project. The ideas are borrowed...google "wooden inwin 301 computex"" (flip that case and add water). I also really liked this case... https://uk.pcpartpicker.com/b/xmJ8TW

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 3 points 23 days ago

To be honest it was a lot of work upfront in CAD and then lots of cutting, trimming and filing to fix all the little design errors. It looks good but not exactly robust. I appreciate now how much work must go into a really good and versatile case design. Metal has lots of advantages. Whilst I dont regret it at all I think a good approach might be to mod or clad a steel case.

Zambacan's Completed Build: A Ply'ed Technology

Zambacan submitter 1 Build 3 points 23 days ago

thank you...I really liked the wood veneer Shift case you made!

ColdConduct's Completed Build: Rugged Ryzen - My RAGE Inspired Build

Zambacan 1 Build 2 points 2 months ago

fantastic build well done!

FRGresidentDK's Completed Build: Redneck Engineering

Zambacan 1 Build 1 point 3 months ago

It's the anti-rig...i.like it but I would love to tidy the desk and clean the screen.

FRGresidentDK's Completed Build: Redneck Engineering

Zambacan 1 Build 2 points 3 months ago

Nice brother in law!

gastec's Completed Build: Mr. ROG

Zambacan 1 Build 1 point 3 months ago

I really like this solution to having the pc on display without losing any disk space.

Greenterrorz's Completed Build: Green Machine

Zambacan 1 Build 1 point 4 months ago

Looks great where did you get the desktop wallpapers?

Melluuu's Completed Build: My little friend that punches upward -- watercooled node 202.

Zambacan 1 Build 1 point 5 months ago

ok thanks I will try to find something similar. Which country are you in?

Page
1