add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube

Comments

Comments

Comment reply on sorany's Completed Build: You're My Boy Blue!

  • 41 months ago
  • 2 points

Bending hard tubing is not that easy. You can have problems when bending with too much heat and too little heat. you can run into alignment issues. bending hard tube is very time consuming and risk of wasting tubing. The plus side is you don't have many connections where you might get leakage. The amount od bends he has it would have taking him a lot of time and a lot of headaches. I think he did the right choice.

Comment reply on sorany's Completed Build: You're My Boy Blue!

  • 41 months ago
  • 1 point

That is a fail proof setup. A little on the pricey side but if the $ isn't a issue for you, you are good to go. If you are not planning on storing a lot of pictures and videos, you can save a little on the 4tb and go for 1 or 2. Overall those are good quality and performance parts. Whatever you end up with, send us some pics.

Comment reply on sorany's Completed Build: You're My Boy Blue!

  • 41 months ago
  • 1 point

For the first 10 pictures, I was thinking to myself why did he put 2 GPUs and the CPU in one loop on one rad. That is going to get hot. Then I saw the long one at the bottom on pic 11. Enjoy your very nice build and congrats on the feature.

Comment reply on ped90's Completed Build: Eastwood

  • 45 months ago
  • 1 point

Nice and tidy. looks good man. At first I was freaking out because I thought you had it sitting on felt. I was saying "this guy is nuts the static will fry everything. I then realized it was a MDF board. Again good job and enjoy. Keep us posted it you ever upgrade or change anything.

Comment reply on yargatokad's Completed Build: I7 6700k Beast - MSi 980Ti - 32Gb - M7 Msi Board

  • 45 months ago
  • 1 point

Looks really nice. The ATX mobo looks like an ITX in that case Holy S#1T it's big. although big is good it you are going to custom water cool. Keep us posted with the updates.

Comment reply on Batmandrew's Completed Build: Beware my power, Green Lantern's Light!

  • 45 months ago
  • 1 point

Haha I like how you price listed the action figure. Nice build and nice choice of parts.

Comment reply on vasponger's Completed Build: Elvira - black and white build. NZXT brand whoring.

  • 45 months ago
  • 1 point

True that What you don't see can't bother you Haha.

Comment reply on vasponger's Completed Build: Elvira - black and white build. NZXT brand whoring.

  • 45 months ago
  • 1 point

Looking at your old PC, I understand why you went for a monochrome build. Haha .I mean Colors were all over the place in that thing. Overall Nice new build man.

Comment reply on lyrisca's Completed Build: Casey's First Build

  • 47 months ago
  • 2 points

Nice looking build. I love the CRYORIG cooler, it just looks perfect with that black top. You forgot to price the 2 peripherals on your last pic. I'm sure they increase your gaming and working experience. Haha

Comment reply on Scrounger's Completed Build: Skylake Failure!

  • 48 months ago
  • 1 point

Ya you will be good with that one.

Comment reply on theamcaddict's Completed Build: The Frugal Unicorn-ucopia. What is old is new again, and again, and again.

  • 48 months ago
  • 1 point

Sure will. I will post a complete unit soon. Haha that little tean bracket was a pain to remove without breaking it.

Comment reply on theamcaddict's Completed Build: The Frugal Unicorn-ucopia. What is old is new again, and again, and again.

  • 48 months ago
  • 2 points

Haha I am redoing one as well the case will be altered. So far I have painted the case black and the teal drive holder red.

https://pcpartpicker.com/b/PmTH99

Comment reply on Scrounger's Completed Build: Skylake Failure!

  • 48 months ago
  • 2 points

That's a shame. Sorry You had so many problems. To be honest I'm not a big fan of gigabyte either. I much prefer MSI and Asus. Thanks for the not working builds it's nice to learn the bad, it's not always rainbow and unicorns Haha. Good luck with the boss.

Comment reply on Ralphort's Completed Build: Gamecube

  • 48 months ago
  • 1 point

Haha Nice. Looks good and the H50 make sense since the space is limited in that case. Again Nice build man.

Comment reply on zombiebait's Completed Build: Re - Update MSI Build

  • 48 months ago
  • 1 point

Very nice build. Love the MSI touch on the table. You HDD should be fine they are usually resistant to Shock but it would have scanned for damage like yours did. Thank god everything is fine with it .

Comment reply on Ralphort's Completed Build: Gamecube

  • 48 months ago
  • 2 points

Very nice I love the custom touch of the H100i. The MSI logo on it looks great with the Red tubes.

Comment reply on The_Silent_Riot's Completed Build: Ember

  • 48 months ago
  • 1 point

Haha nice. See I knew it was something easy Anyway Nice build man.

Comment reply on RobinHood5's Completed Build: 5930k - GTX 980 - Gaming Rig

  • 49 months ago
  • 1 point

It is still a good price. But he got better that's all Haha

Comment reply on The_Silent_Riot's Completed Build: Ember

  • 49 months ago
  • 1 point

That's exactly what it was. People overthink stuff sometimes. Green screen and several pictures in photoshop.

Comment reply on Ja_osh's Completed Build: 60 fps in minesweeper!!!!!

  • 49 months ago
  • 2 points

+1 for the one core potato hahaha. But the quality of the pics though did you take take with a 2000 flip phone.

Comment reply on ethanyui's Completed Build: 500 Dollar Red Build

  • 49 months ago
  • 1 point

HAHA !!

Comment reply on ethanyui's Completed Build: 500 Dollar Red Build

  • 49 months ago
  • 1 point

The best part of the PSU are the toes on picture 3. Those must have cost a lot. That why you couldn't get windows. I am just kidding Good build overall. Enjoy and keep us posted when you upgrade it.

Comment reply on donaldgclarkiii's Completed Build: Black Friday mATX Budget Beast

  • 49 months ago
  • 3 points

Nice build. Case looks good. you will get people telling you stuff about your PSU. Usually I don't say much about them even when people bash on the Corsair CX series so much but If you plan on overclocking, I would get a better PSU first. Good job overall

Comment reply on exiacruzalta's Completed Build: Noctis Aquila (First Gaming Build)

  • 49 months ago
  • 2 points

The r9 290 Vapor looks great. The size though... it's bigger and longer that the freaking Mobo. What supports what in that case Hahah. Nice build Part list is good. PSU and SSD would probably be the next upgrade.

Comment reply on alkaiser's Completed Build: 2016 - Black, White, and Red Build Watercool Update

  • 49 months ago
  • 1 point

I'm assuming 2 years ago the PC was not water cooled to the hybrid made sense. When you make a custom loop, Might as well include the GPU.

Comment reply on musababa's Completed Build: First Build

  • 49 months ago
  • 1 point

Hahaha no that would help but the Rams are a big plus on a fm2 cpu.

Test of OC and higher ram

Comment reply on Mexico's Completed Build: My First gaming pc

  • 49 months ago
  • 1 point

Exact same CPU, MOBO, COOLER AND RAM as mine Hahah. Nice build and did you try overclocking at all.

Comment reply on JoeyR's Completed Build: 1080p 60FPS Gaming build under $700

  • 49 months ago
  • 1 point

When you do go for 16GB 2400 rams. This CPU is based on the APU 7850K and benefits of about 10 to 20 FPS just by using higher ram. An SSD would help too. Those should be your next upgrade.

Comment reply on musababa's Completed Build: First Build

  • 49 months ago
  • 2 points

I have an old Case that has almost the exact same layout for the bay drive and on top PSU. The trick is to bring all the cables behind the Hard drive bay and use extension to bring power where required. It would look way better. I know Non modular PSU can be a pain, specially in a case with such layout. Zip ties will help too.

For your next upgrade I would suggest a SSD and 2400 ram. You would get min 20fps just from these 2.

Overall nice little budget build.

Comment reply on nayrnayr1's Completed Build: The Scrapyard Sleeper Gaming PC (TSSGPC for short)

  • 49 months ago
  • 1 point

A fresh coat of paint on the outside of the case and it would look OK!!. When I saw the PSU, I thought WTF is he doing then I saw the interior and realized you used A PSU not suited for the case. good job on the refurbishing.

Comment reply on AshtonWardle's Completed Build: My $1000 stuff up?

  • 50 months ago
  • 1 point

Hey listen to the left shark, he is always right. HAHA

Comment reply on mv2sa's Completed Build: Skylake i5 6600k / GTX 980 ti

  • 50 months ago
  • 2 points

Build looks good. Love the Antec case. I almost bought that as my first case. I know the space at the back is very tight but you could pass a few cables there to allow more airflow from those from fans. Again it is your first build Good luck and enjoy that PC.

Comment reply on jaijaij's Completed Build: The Dark Side Rises - AMD Gaming Build

  • 50 months ago
  • 1 point

walang anuman! Yes the Refresh rate is set set in the TV's hardware. You would need to change the tv but a 60hz should be ok. It is in the minimum but playable. Save some money and get a good screen when your budget and space allows. Good build overall.

Comment reply on Creibold's Completed Build: Hyperion

  • 50 months ago
  • 1 point

I love the black and gold. Yes going for colors other and the standard blue and black or red and black is a pain in the backside. Good job on your build, it looks great.

Comment reply on theamcaddict's Completed Build: $145 Rejuvenated HP pavilion a1777c

  • 50 months ago
  • 1 point

I Like the upgrade for this old HP. I have a A1310n myself that I am refurbishing . Good job.

Comment reply on jaijaij's Completed Build: The Dark Side Rises - AMD Gaming Build

  • 50 months ago
  • 1 point

Magandang pc mo. lahat MSi and AMD. I love it . My build will be used on a tv as well as long as you have an hdmi input with high hertz. 60 hertz will be the lowest to go 120 hz would be ideal. Good job and welcome back to the PC master race.

Comment reply on anthonydnewell's Completed Build: Define S White and Blue Z170 and 970 - Water-cooled

  • 50 months ago
  • 1 point

Look good so far. Try to find some sleeves for the pump wires. a nice white or blue sleeve would be nice. Good luck and keep us posted.

Comment reply on 2112's Completed Build: Dell 790 SFF HD7750 CrossFireX

  • 50 months ago
  • 1 point

Good job retrofitting the cards into that older case. We use the same pc's at work. It got me thinking what if I get myself one of those... I could be playing all day and the boos wouldn't even know haha. Sadly in real life it doesn't work that way. Anyway Good job on your build

Comment reply on sharptooth's Completed Build: blewe

  • 50 months ago
  • 1 point

You are welcome and Yeah being able to rotate the heat sink depending on exhaust location is always a plus. Good jog again.

Comment reply on sharptooth's Completed Build: blewe

  • 50 months ago
  • 1 point

Look from picture 10 to 19 that metal plate that says NZXT on the bottom section and has a little that's cut on the top section. Well that plate is suppose to be black or silver depending on supplies. You would think that this is factory. I think he did a good job.

Comment reply on sharptooth's Completed Build: blewe

  • 50 months ago
  • 1 point

+1 for AMD. Good job on the paint and sleeves. Holy ****!!!! that Heat sink looks amazing. I might just go for that, It makes everything look cleaner. Good job on your build

Comment reply on caleb2884's Completed Build: Surprise Honey!

  • 50 months ago
  • 11 points

That awkward moment when your build Is only worth the price of 1 GPU from his 4 year old daughter 's pc . Very nice build.

Comment reply on VGears's Completed Build: Top 4K+ gaming PC ( Not for the faint of heart)

  • 50 months ago
  • 1 point

Haha nice. I know the mobo takes up to 4 gb. I was thinking about overclocking the CPU, upgrading the rams to 4 gb and adding a low end graphics card. The only thing is the 184 pin DDR are 16$ per GB. I decided it's not really worth it in that PC.

Comment reply on xeliam's Completed Build: Blood Red

  • 51 months ago
  • 2 points

Those are great fans, I have them myself but the performance AF fans are for Air Flow meaning they great to bring air in and out of the case without any restriction. If you would have went for the Quiet SP meaning static pressure, you have been able to get even cooler temps. The SP fans are designed for restricted air flow or pressurized flow. They pull more or push more against something, filter, Radiator or grill. Just my 2 cents. Those fans are good just the SP's would have work better in that application.
My build will eventually look like yours, Blood red dye in the coolant and Red corsair fans. Good job on you build

Comment reply on lightningzepher's Completed Build: The (C)Rappster

  • 51 months ago
  • 2 points

Parts Chosen are great for the price. Good job on the build Hope your friend was happy with it.

Comment reply on kyzel2304's Completed Build: "Tigris" Latin for Tiger

  • 51 months ago
  • 3 points

Those are called cable combs. They can be purchase separately. Some red ones would look good in your rig.

Comment reply on gomskek's Completed Build: My wife's Gaming/Photo editing PC

  • 51 months ago
  • 1 point

Alright where do I apply. Just kidding but that sounds awesome definitely something I would like to do. Build looks good and keep us updated on the next HIS and HERS.

Comment reply on gomskek's Completed Build: My wife's Gaming/Photo editing PC

  • 51 months ago
  • 1 point

What kind of job do you have to be paid to play games. I want that haha

Comment reply on rbm4's Completed Build: AMD FX-6300 & GTX 960 semi-low budget

  • 51 months ago
  • 1 point

That cooler and that PSU makes a lot more sense. We didn't force you to change it we just gave our opinions. I'm sure you will be happier with the new ones.

Comment reply on bobcat1123's Completed Build: Refurbishing/Cleaning Old Computer (2007-ish)

  • 51 months ago
  • 1 point

Pffffff That thing would run WItcher 3 BF4 and GTA V on ultra simultaneously. But mineswiper don't count on it. HAHA

Sort

add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube