|( 27 new from €129.90. Last updated 4 hours ago. )|
|€121.71||+€8.99 s/h||In stock||€130.70||Buy|
|€129.90||+€6.99 s/h||In stock||€136.89||Buy|
|€137.90||Out of stock||€137.90+||Buy|
|€129.90||+€12.90 s/h||In stock||€142.80||Buy|
|* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.de at the time of purchase will apply to the purchase of this product.|
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
- Air 540
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
Motherboard Form Factor
- Mini ITX
- Micro ATX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
320 mm / 12.598"
- 414 mm x 331 mm x 457 mm
- 16.299" x 13.031" x 17.992"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 62.625 L
- 2.212 ft³
- 79 points
- 57 months ago
from completed build My Rendering Machine
This is a god case Corsair. It has quite a bit of room and provides me just enough room for all of my water-cooling parts and I like the glass panel as well. It's a good case for first builds in my opinion.
- 46 points
- 41 months ago
from completed build Skylake Gaming Cube
One of my favorite cases, lots of room to work with, and superb airlfow
- 36 points
- 34 months ago
from completed build The Unryzen
Currently my favorite case with so much room and wire tending capabilities that it is just impossible to make a messy build in this case. The extra chamber for wires, SSD's and power supply is great. It comes with a washable filter in the front. Only suggestion is to replace the two 140mm fans in front with 3 120mm fans for a slightly positive pressure setup.
- 32 points
- 53 months ago
from completed build Puff The Magic Dragon
Great case! Love the aesthetics, the double sided configuration gives you TONS of room for cables, and for someone like me that is terrible at cable management this is a must have.
The cube look isn't for everyone and it certainly takes up a substantial portion of my desk, but I really enjoy the full size window and great airflow that it brings.
My only complaint is that they cheeped out on a couple weird things for some reason. The SSD mounts are ****, don't get me wrong, they work, but only just. There is no vibration dampening on the HDD bays which is noticeable only sometimes and there is no vibration dampening on either of the 5.25 bays which makes reading media from a disc a very loud experience.
Over-all I would make the same choice again though. Love the case.
- 30 points
- 50 months ago
from completed build The First of Many
The only problem in the whole build. The hotswaps that came with it didn't work at all, so had to manually route the SATA power and data cables in a tiny hole. And with the SATA power cables having multiple connecters in each cable, that became a real hassle. But at the end , I was able to cable manage everything. Other then that, the case is great, with a giant amount of cable management space, and a great window. Also with it's cube form, easier to put it on a desk to admire.
- 26 points
- 49 months ago
from completed build Iron Cube (First Build)
Beautiful and great airflow case, only downside is how fat this case is, I knew how big it was going into this but now im regretting it since my triple monitors are having a hard time to fit. Nonetheless this case is really convenient and well thought out, kinda pricey for the quality. Windowed side panel scratches VERY easily.
- 26 points
- 27 months ago
from completed build Got Wilks? - Powerlifting Meets Watercooling Build
BEAUTIFUL CASE, but if I were to extend my loop to SLI, I probably would choose a bigger case. I personally like the look of a mounted reservoir in sight, but I could not fit it in the front, so it had to be hidden in the back.
- 24 points
- 42 months ago
from completed build No longer another red and black build
Originally this build was housed in a Define R4. I was afraid the thermals would be too high running SLI so I did some research and came across this. Fell in love with it lol. I really like that the PSU is in the back and it has great airflow.
- 23 points
- 42 months ago
from completed build First Build, Might as Well Make It Look Good *Updated May 2018*
Its a huge case. The compartment in the back is designed to house all of the cables as well as the power supply. It looks great but would have gone with the smaller 240 case if i had to do it over again.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters