Versa J22 RGB
ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
- Mini ITX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
310 mm / 12.205"
External 5.25" Bays
Internal 2.5" Bays
Internal 3.5" Bays
- 6 points
- 10 months ago
from completed build First Build | i9 Workstation/Gaming PC
Not the best case, but not the worst.
3 fans included are nice, as well as the hub
RGB is great!
support for up to 280mm cooling(for the front only)
Cable management is subpar. 3/4" of space behind mobo forces you to stuff cables.
there's only one hole above the motherboard you can use for cables like the 2x4 8-pin ATX cable(even that is frustrating, since the rear fan and any radiator you put on top force you to use your fingertips to push the cable in).
There are 2 HARD DRIVE BAYS right next to the PSU shroud. Not helpful at all, and I had to cram the SATA cables to fit it. It takes away valuable space needed for cable management. The barrier between them
No holes that go directly from PSU shroud to GPU. Manageable without it, but it would be nice to have that.
No dedicated routing for specific cables(PCI-E for GPU, SATA, etc.).
When you get the case, none of the fan hub cables are tied down for convenience. You have to tie them down yourself.
Overall, the case is a good attempt at an RGB tempered glass case offered for a good price, but it's fatal flaws bring it down in terms of quality.
- 5 points
- 6 months ago
from completed build Lightspeed
I don't know what the other reviews are talking about. This case is great for the price I paid. The cable management is decent, with zip tie slots on the back, and big holes for motherboard cables. The HDD tray is a bit crammed, but my last case was like that, so I don't care. Tempered glass could be ever so slightly darker in IMO, but I guess that is just the amount of LEDs I have inside. The RGB fans work great, and the included manual is helpful. Plenty of screws provided. Top and PSU vents are filtered. Fits a Hyper 212 Black Cooler.
Note about the LEDs: if you don't have MB control like me, you could use the built in controller, but my suggestion is that you buy a cheap led strip on amazon and daisy chain the MB connector on the fans to the strip, because the strip will have WAAAY more lighting modes than the case does, and it also syncs them.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters