PCPartPicker

  • Log In
  • Register

Case Fan

Fractal Design - FD-FAN-SSR2-140 66.0 CFM 140mm Fan

( 4.5 Average / 52 Ratings )

Specifications

Manufacturer

Fractal Design

Part #

FD-FAN-SSR2-140

Color

Black / White

Size

140mm

Air Flow

66.0 CFM

Noise Level

18.5 dbA

RPM

1000 RPM

Features

All new Silent Series R2 fans are equipped with high performance hydraulic bearings, increasing both fan performance and reliability.
The 120mm and 140mm fans come with a low-speed adapter, which lets you choose between two different rotation speeds without a separate fan controller.
Each fan 60mm and larger is packaged with both 4 metal screws and 4 rubber screws to ensure maximum fan-mounting options.
Using the rubber screws allows mechanical decoupling from the case itself, reducing vibrations and decreasing the noise level (40 and 50mm feature metal mounting screws only)

Completed Builds Using This Part

See All Completed Builds

Prices

Prices for this part are not available.

Reviews

pdastoor 12 points 34 months ago

Quiet and cool

jerboa88 2 points 33 months ago
from completed build BlackIce (First Build)

Decent fans. Quiet when I want them to be. I have one mounted horizontally that rattles a bit when cranked up.

freefone0800 10 points 32 months ago
from completed build Dual boot build (now Triple boot)

Not the fastest but quiet - plus less than a tenner a pop.

Mojitoman 8 points 30 months ago
from completed build Jack the Ripper vol. 2

Very quiet and high performing.

warlockalypse 13 points 28 months ago
from completed build Stormbringer

Came with the case. Nice looks and they keep everything cool.

weave 16 points 28 months ago
from completed build Wombo Combo- 2015

Good fans for the price. However, the mounting options are terrible IMO. They come with 4 metal screws and 4 rubber screws. I used the rubber screws, which were a real PITA to use. Mostly because you have to pull them pretty hard to secure them. However, room in the case was limited after installing everything else and you would have to get in weird angles and tight spots to try and pull these rubber screws through the mounting holes. Furthermore, if you pull to hard trying to secure the screws, they will slip through the case mount holes. Meaning you have to remove all the previous rubber screws and try again!! Also, I ended up breaking one of the rubber screws b/c I pulled too hard on it. Fan mounted fine with just 3 and still stays silent though.

roawh 10 points 22 months ago
from completed build Make that coffee BLACK

Quiet fan that doesn't push a whole lot of air. Still keeps the temps in my Define R4 reasonable. If you would be running this at higher RPMs, you're better off with a higher performance model. If you're using the fan controller @ 5V or using the motherboard control in "Quiet" mode, this will get the job done.

Acidium 11 points 17 months ago
from completed build Big Black Box (3B)

Very quiet fans that provide a good amount of airflow!

phisig2229 21 points 16 months ago
from completed build Arctic Whitefox

Great silent fans. I wish I had researched a little more to match the blade design to the ones that were included with the R5 (these have more, smaller blades than what's included). Not that big of an issue but again, one of those OCD things for me.

iamangeloeugene 11 points 15 months ago
from completed build My Humble PC

For aesthetic purposes I want all the fan spaces to be filled. This goes to the top along with the NZXT Kraken x41 for exhaust.