|( 1 new from €149.90. Last updated 1 hour ago. )|
* Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.de at the time of purchase will apply to the purchase of this product.
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
Yes - 280 mm
- 206 points
- 17 months ago
from completed build The Joker - Revamped Part2
IMO one of the best AIC out there for the price
- 129 points
- 40 months ago
from completed build The Joker - First Ever build
nicely packaged and considering I was a first time builder I was a little nervous when it came to installing this however I was pleasantly surprised to find out it was relatively straight forward.
NOTE: When putting on the backplate I initially thought I had done it incorrectly has it was quite loose however once I connected it to the CPU it was absolutely fine and tight.
- 95 points
- 38 months ago
from completed build Sofi's Bow Wow Build
Honestly, the Noctua NH-D15 in my other computer seems to get better temps than this H115i, but it looks a heck of a lot better. I was initially going to install the CoolIT based H110i that many people on the Corsair forums seem to prefer, but the one I received came with a lot of bent fins and it looked a bit dated compared to the Asetek based H115i.
I highly recommend this cooler if you want to go the CLC route. The only thing you miss out on going for the Asetek based H115i over the CoolIT based H110i is the couple extra LED lighting modes, hoses that are more bendable, and a fan controller that can report two fan speeds. But what you gain is a more rigid hose and a more modern looking radiator and CPU block.
The stock fans are actually quiet by default. They only get really loud when you switch the profile to performance mode or raise the RPMs yourself.
- 56 points
- 29 months ago
from completed build 2 Identical First Builds
Added this to the front of our builds in push/pull. It's a tank but it works great! Cools the CPU while moving a decent amount of air into the case.
I have one complaint about it. The Corsair link USB power cable plugs into the bottom of the cooler that's mounted on the CPU. In my opinion, it looks bad and it is near impossible to hide. It would have been easier if it was mounted on the side, at least for our builds and I did not want to rotate the block because of the Corsair name that lights up on it. Just a minor annoyance.
- 50 points
- 38 months ago
from completed build Regularised & Mesmerised
H115i This unit was a breeze to install! The size of the radiator utilises every mm of space on the face of my case, and the fans are setup in between the frame of the case and radiator in an intake configuration.
- 42 points
- 36 months ago
from completed build Shadow
This thing is awesome, the RGB LEDs giving away the perfect color you want, smoothly, no imperfections.
- 38 points
- 31 months ago
from completed build Brisingr! My first ever PC
Keeps my cpu way cooler than on air and looks great in my system! The fans are pretty good, but make a decent amount of noise so might get some ML fans from Corsair to replace the stock ones in the future.
- 37 points
- 42 months ago
from completed build Project : Warmachine
X61 was my first choice but ireally like the build quality of corsair loving that sexy sleeved tubing.
- 36 points
- 25 months ago
from completed build Silver Sylvalum
A subtle yet simple aesthetic to this AIO cooler. Runs quiet and keeps CPU temps low. Corsair LED color can be changed with Corsair LINK software. If you're buying this for AMD Ryzen CPU, make sure you also buy the AMD retention bracket kit, for this does not come included with the box.