ATX Mid Tower
Side Panel Window
Power Supply Shroud
Front Panel USB
- USB 3.2 Type-A
- USB 2.0 Type-A
Motherboard Form Factor
- Micro ATX
Full-Height Expansion Slots
Half-Height Expansion Slots
Maximum Video Card Length
400 mm / 15.748"
Internal 2.5" Bays
Internal 3.5" Bays
- 16 points
- 19 months ago
from completed build G5400 Budget Gaming Build
I like this case. It has modern features and looks nice, has plenty of drive mount options, a basement, and holes and tie points for cable management.
The only big thing is the front LEDs quit within about an hour of being used the 1st time. Review feedback on this case seems to indicate this is a serious issue with this case, so if pretty LEDs in front are your thing, this case should be avoided. It was not enough to get me to send it back, however. It also has snap-off card slot covers that can't be replaced once they're off, so pay attention to what you're removing.
The case is physically larger than needed due to the build plan changing some, but better too big than too small I suppose. Certainly can't hold this against the case.
- 12 points
- 4 months ago
from completed build Mid Ranger -Gaming doesn't have to be expensive
Lots of features for the price. A side window, 3 fans(1 BLUE!), spacey, good cable management all for a great price! Although the material is crappy, side panel is already bent and ssd cage door is broken. Not getting one of these again.
- 8 points
- 6 months ago
from completed build First Ever PC Build
I got the cheapest case because there are new cases coming out in August and I think I will upgrade then. It wasn't bad to build in, the cable management was easy, but my PSU is also fully modular, so that helps. One fan in the back of the case for exhaust. I wish there were top fans but this will do for now. Overall, great case for the price.
- 2 points
- 8 months ago
from completed build Factorinoko
The headphone and microphone jacks have a bit of crosstalk and the USB ports are upside down, which might be nice if you need to look at a flash drive from the front to see if it is doing anything but it is a minor annoyance at best. The power button has a satisfying actuation and the reset button is small enough not to accidentally trigger. There is no front dust filter and no top fan mounts but does support 360mm rads in the front. There are no front drive bays. It includes two front fans and one rear blue LED fan, all powered by Molex or 3-pin. The window is acrylic and the power supply shroud has a honeycomb-patterned perforation on top. Within the PSU shroud, there are two toolless hard drive trays and behind the motherboard panel is one SSD mounting panel. The front lights up blue and the LEDs are held in via hot glue and are powered by Molex. For a mid-sized ATX case this cheap, this is a real bargain and I can recommend this.
- 1 point
- 21 months ago
from completed build Basic Cheap Gaming/Server Rig (Server Eamon)
Pros: -There were no sharp edges -Everything was clearly labeled -Lighting looks great -USB 3 at this price is amazing -Even though people were talking about dead fans, It's nice for me that they all came working, meaning I needed only one more 120mm fan to fill it up. -Screwless Hard Drive mounts are nice -Fans, even at full speed, are pretty much silent, although at first one of them had a vibrating bearing (it somehow smoothed itself out) -The fans have a nice Molex adapter coming off the 3-pin fan header (They're chainable, which means you can put everything including the lighting power connector(also molex) onto the same
Cons: -Could fit more 3.5" drives. -Not all of the 2.5" mounts have a nice single screw sled -Even though the edges aren't that sharp, could still use rubber grommets
Other Thoughts: -Vents on the front could be nice -This thing has space for more fans in the top.
- 1 point
- 9 months ago
from completed build 860K R9 380 (First Build)
I got this case because it came with three fans, a power supply shroud and good cable management. When it arrived I wish I went wit something else. The airflow on this thing is horrendous, the acrylic panel gets scratched up with your fingernail, and the cable management holes are placed horribly. It's flimsy, the brackets are not able to be put back on, and the fans don't push any air. Only thing good about it is the amount of room for cable management.
- View Compatible CPU Coolers
- View Compatible Fan Controllers
- View Compatible Motherboards
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters