Description

This is my ITX computer, I use for med - high video game play BF4, i was shock how good it was running. The hard part was trying to hide the cables, i tried my best to put behind the motherboard, but unable to find room. I have a white led strip inside the case giving it a nice look. On my desk i have alot of phone parts, and parts of other phones.

I swap the stock rosewill case fan with a delta fan, SUPER GOOD, moves the air real good, sounds like turbine from the computer.

The monitor i got for around $$200 - super clear quality

Log in to rate comments or to post a comment.

Comments

  • 63 months ago
  • 3 points

You could've saved so much money on the CPU... Should've gotten a cheaper one (AMD possibly), then upgraded the case (which you shouldve gotten a much better one) and also a lot more money into the GPU

  • 63 months ago
  • 2 points

Nah, i5 4690k plus a z97 mobo and 250d corsair chassis would be better and still cheaper than his current build.

i5 4690k + z97 mobo + 250d

  • 63 months ago
  • 1 point

I would have stuck with the same case since you are only saving $10 on it, other then that a much better CPU choice.

  • 63 months ago
  • 2 points

Intel is the way to go for ITX builds even though I hate to say it, the TDP on the AM3+ socket is too high for ITX boards. I would not recommend gaming on an AMD APU which does have ITX boards, because the APU is so much weaker then anything Intel has to offer in processing power.

  • 63 months ago
  • 2 points

I would take the LED out and cover up the Window. All it does is highlight the spider web of cables.

  • 63 months ago
  • 1 point

why bother with case lighting when your wires look like a birds nest?

  • 63 months ago
  • 1 point

No way in **** that cpu only runs at 30 degrees in that mess.

  • 63 months ago
  • 1 point

Take a picture of the PSU from below. Is the fan at the top, against the case, with no vent??

  • 63 months ago
  • 1 point

As others have said you need to work on the wiring, you may have to replace the PSU with a modular PSU so you don't have as many extra cables. I have seen other build with this tower that look very clean. A few of them people mention they run the towers power/USB/Audio cables under the mobo as well as the sata cables, and for the PSU's extra cables they put them behind the PSU (between the PSU and the side wall without the window). I hope those suggestions help.

Other then the wiring job this PC has a really good parts list, the only major part change (aside of the PSU if you cannot clean it up)I would do is to ditch that GPU its really old.

  • 57 months ago
  • 1 point

How tight is that graphics card?

  • 57 months ago
  • 1 point

fits 100% , still good airflow