Description

Hey,

I started planning this build since mid-January, building it mid-March and started my custom loop last weekend(early April). It was a long process, but like you can see, the wait was worth it.

Yes, my ram is kind of slow, but I'm playing at 1440p and the gain of 3200MHz is only 3% according to TPU. I got an amazing deal from Amazon last summer, and it's 32gb haha.

I'm waiting for Vega, this is why I still have my old champion (R9 290X).

Watercooling & others:

  • Reservoir: Heatkiller 150DDC (with white plastidip)
  • Fan: Corsair ML120 & ML140
  • Radiator: 360mm Darkside LP360
  • Radiator: Alphacool NexXxos 420mm ST30
  • CPU block: EK Supremacy Evo
  • GPU block: EKWB
  • Cablemod magnetic RGB (6x 30cm)
  • Cablemod custom cable
  • fitting: mostly darkside, but a couple from bitspower.

edit: Thank you all for the feedback and thank you PCPP for the "featured build"

edit2: If you want to see me filling the loop :) (already have distilled water in it) https://www.youtube.com/watch?v=QKHPuRDn6JI

Part Reviews

CPU

Really smooth experience and a powerhouse.

Motherboard

Little pricey compare to Intel, but great motherboard overall. Asus is quick on new BIOS.

Memory

Great looking RAM, too bad they don't have faster version with samsung B die, but for the price I paid (130CAD, thank you amazon.ca), it's a no brainer.

Storage

Really quick drive, but you'll not notice any difference versus a normal SSD if you don't do too much.

Storage

Great looking SSD with a good warranty.

Video Card

Got it for 3 years, on air this is a jet engine, but on water, this card is really great and served me well.

Case

Amazing case, probably the best bang for the buck. but the cable hole for the 24pin is ugly.

Power Supply

12 years warranty and the best 850w you can buy at the moment. say no more, have my money.

Case Fan

great fan, but pricey.

Case Fan

great fan, but pricey.

Monitor

Great freesync monitor with a good TN panel.

Keyboard

this keyboard is a tank. you can probably kill zombie with it or hit you mother in law.

Mouse

amazing grip, little bit pricey, but the color theme is ugly.

Headphones

probably the best bang for the buck headphone you can buy for a PC gamer. I also have a pair of Audio Technica ATH-50x and I find this one more confortable and with a better sound.

Custom

great speaker with amazing features.

Comments

  • 32 months ago
  • 26 points

can... can this be a Featured build? it's gorgeous... it looks like it's cooled with the finest of maple syrup...

  • 32 months ago
  • 8 points

There's Canada for ya

  • 32 months ago
  • 3 points

Awesome build! Make the red. white and maple proud!

  • 32 months ago
  • 6 points

Found the Canadian

  • 32 months ago
  • 12 points

Who cares about this guy's pc? Look at his photography skills.

  • 32 months ago
  • 5 points

Haha, thank you. I started photography a month ago. Bought a Sony A6000.

  • 32 months ago
  • 1 point

the new equation is: monitor quality = photo quality

  • 32 months ago
  • 4 points

I can feel it.. FEATURE in the air toniiight, ohh lawd.

  • 32 months ago
  • 3 points

Did you post this on the PCMR reddit? I thought I saw it there...

Its beautiful!

  • 32 months ago
  • 2 points

Yeah :), thank you.

  • 32 months ago
  • 1 point

i knew this will get featured!

  • 32 months ago
  • 3 points

I see a feature in your future. +1 from me. Bet you can't wait until Vega, it will be the reddest of beasts.

  • 32 months ago
  • 3 points

I wasn't logged in, but I did just so I could upvote this. Amazing build you have there.

  • 32 months ago
  • 3 points

Can we have more sexy pictures?

  • 32 months ago
  • 4 points

Sure :) come back tomorrow.

  • 32 months ago
  • 4 points

more pictures :D

  • 32 months ago
  • 1 point

Love it. All of it.

  • 30 months ago
  • 3 points

What a crisp clean build. All neatly bundled and calculated with a cool precision. The work space a round it a clean tidy smooth experience. Beholding such craftsmanship feels like a walk in a maple forest on a bright spring morning after a long rain.

My PCs are usually trash goblin PCs. Covered in stains and tangled wires. Sticky notes all over the side to remember things I have to do. Tool-marked panels and dangling peripheral cables. When you turn them on the smell of the junkyard I work in mixed with my girlfriend's last night's weed permeates through the air.

  • 30 months ago
  • 2 points

That was fun to read :D thanks :)

This build is now taken appart, I'm starting my new one.

  • 32 months ago
  • 2 points

White Zenith

Now we just need its little brother

  • 32 months ago
  • 2 points

+1 for the inwin 303. Love this case.

Such a clean setup.

  • 32 months ago
  • 2 points

Awesome build! Best of luck with it and may your system be stable and your temps low! Thanks for being #TEAMROG

  • 32 months ago
  • 1 point

Featured

  • 32 months ago
  • 1 point

Absolutely STUNNING build! +1 from this dude!

  • 32 months ago
  • 1 point

Thank you :)

  • 32 months ago
  • 1 point

This build is awesome.

beautiful PC +1

  • 32 months ago
  • 1 point

RYZEEEENNNNNNNNNNNNN!

  • 32 months ago
  • 1 point

Beautiful! Great execution and I love the tiny details like those fan stickers.

Great great work. Two really nice watercooled builds in a row on here.

  • 32 months ago
  • 1 point

Thank you :)

  • 32 months ago
  • 1 point

Holy crap on a cracker, this is bada**. Really great work.

  • 32 months ago
  • 1 point

Thank you :)

  • 32 months ago
  • 1 point

This is amazing!

  • 32 months ago
  • 1 point

this build reminds me of the medic class from team fortress for some reason. very nice looking !!

  • 32 months ago
  • 1 point

Haha, this build remind me of the first car of Need for Speed underground 1 (the white and red Honda Integra)

  • 32 months ago
  • 1 point

1+ for reddit builds

  • 32 months ago
  • 1 point

1+! WOW! THIS IS SO AMAZING! i love it! great photos, great build! i hope this gets featured!

  • 32 months ago
  • 1 point

wow.

  • 32 months ago
  • 1 point

Very nice. You did a wonderful job.

  • 32 months ago
  • 1 point

Pls feature

  • 32 months ago
  • 1 point

Looks like a Team Rocket build.

  • 32 months ago
  • 1 point

This is absolutely beautiful! +1

  • 32 months ago
  • 1 point

Can you show the back of the top compartment? I would love to see how you did the tubing at the top!

  • 32 months ago
  • 1 point
  • 32 months ago
  • 1 point

That routing is so unique, clean, and cool. Im going to have to take some inspiration from that when I do mine.

  • 32 months ago
  • 1 point

Yeah haha, two friend of mine helped me a lot for the routing (Duality92 and SnefComputerDesign). I was so lost at first.

  • 32 months ago
  • 1 point

Meaning it was their idea and you didn't know what they were thinking? Or just routing the tubes in general?

  • 32 months ago
  • 1 point

It was duality Idea to pass the tubing behind the PSU shroud. the rest was all my idea (everything).

Snef helped me a lot for my first build.

  • 32 months ago
  • 1 point

great build!

  • 32 months ago
  • 1 point

Sexiest Ryzen build on the site! I think you'll get featured for sure!

  • 32 months ago
  • 1 point

Hello! Please get featured. Thanks!

-Ryan

+1

  • 32 months ago
  • 1 point

My god. That's a masterpiece. bows down

I can only hope my future Ryzen 5 build will look half as good as yours.

  • 32 months ago
  • 1 point

I'm sure it will :)

Reminds me of Fire Mario! With the pipes and all. You obviously put a lot of work and imagination into it. +1 from me.

  • 32 months ago
  • 1 point

what is that reservoir ?

  • 32 months ago
  • 1 point

Heatkiller 150 DDC.

  • 32 months ago
  • 1 point

Great team red build. It looks really nice. Congrats on the featured spot.

Thumbs up.

  • 32 months ago
  • 1 point

what table is that?

  • 32 months ago
  • 1 point

Ikea Gerton :)

  • 32 months ago
  • 1 point

Wow! I am stunned... this build is so beautiful!

  • 32 months ago
  • 1 point

What rads are those? And how did you mount the res?

  • 32 months ago
  • 1 point

res mounted on the wall

Rad are in the descriptions.

  • 32 months ago
  • 1 point

Oh srry I am blind apparently. Noice build btw +1

  • 32 months ago
  • 1 point

Nice build, great choice of colours, very patriotic. +1 :)

  • 32 months ago
  • 1 point

Good job on the feature, the blue and green cable in that one photo though...

  • 32 months ago
  • 2 points

Shhhhh :p

  • 32 months ago
  • 1 point

Ryzen done right!!! May it serve you in health.

  • 32 months ago
  • 1 point

Do they make fittings that specifically suited for connecting a CPU block to a GPU block? It just seems like it has to be a perfect fit with non-bend hardline tubing to get it to work with only fittings.

  • 32 months ago
  • 1 point

Well done, looks great. Glad you used 12mm tubing. I prefer it myself.

I'd recommend busting out the dremel and cut a new pass through for the 24 pin. In-win didn't think that one through. Also, I havn't worked with that case yet, but if there is a pass through around the bottom, I'd route those GPU cables strait down. It would make those cables bad ***. The only thing that would suck is you'd have to break down the loop to cut into the case :p

  • 32 months ago
  • 1 point

I can't cut a new pass through for the GPU because I have a SSD behind, same thing for the 24 pin :/

  • 32 months ago
  • 1 point

Eh, don't worry about it then! Still looks awesome.

  • 32 months ago
  • 1 point

I thought it was a re-upload because your previous build is very similar.

P.S. Looking Fresh

  • 32 months ago
  • 1 point

Love the custom one pro's they are definitely not the best bang for the buck headphone for gaming. That title belongs to the SHP9500 and the HD 558 (; Great build!

  • 32 months ago
  • 1 point

Astonishing how many fans and cooling parts you managed to cram inside and still make them all look neat and beautiful. A worthy feature.

  • 32 months ago
  • 1 point

nice

  • 32 months ago
  • 1 point

Wow, this is an amazing PC, great cables management, custom cables, and not to mention a great looking Loop as well +1

  • 32 months ago
  • 1 point

not enough rgb!

+1

  • 32 months ago
  • 1 point

I have the same mousepad, therefore my build is just as good. :DDD

  • 32 months ago
  • 1 point

My god that case looks great. I can't wait for the 301 (mATX version of this case) to come out. I'll definitely be building with that once there are more mATX boards or the B350M Mortar Arctic is in stock in the US

  • 32 months ago
  • 1 point

Great build. Congrats on the feature.

  • 32 months ago
  • 1 point

What speakers are those? Ive been looking for good white speakers for a while

  • 32 months ago
  • 1 point

Kanto YU3

  • 32 months ago
  • 1 point

Finally got that feature, congrats!

Red and white isn't that common... looks badass

  • 32 months ago
  • 1 point

Just awesome. Congrats on the feature.

Love it. Color balance, the extra touches (the little things count). Very original. +1e12

  • 32 months ago
  • 1 point

Really awesome build!! Take many +1s . Currently saving up for my RYZEN R5 1600X build and that badarse EVGA FTW3 1080ti. Super pumped about my upcoming build. Going to be l33t.

Excellent work and cable management!

https://pcpartpicker.com/list/nrL7HN

  • 32 months ago
  • 1 point

Thank you! :)

Wow, your build is looking good!

  • 32 months ago
  • 1 point

ThX!!! I am so hyped about how its going to look when its finished... wish me luck, trying to get my funds up 1st then i going to start buy couple parts at a time. WIll take a while like yours did, but I rather take my time vs doing a rush job. Will be my 1st watercooling attempt ever!!!

  • 32 months ago
  • 1 point

You'll be fine. Just prepare everything, dont rush anything. be sure you put all your o-ring in your fitting. don't forget any stop plug. put a **** load of paper towel when you fill it just in case. remove all the air you can in your loop.

Best thing you can do for your first build is buy distilled water at WalMart (great value 1gal), so even if you drop some, you'll be fine, after you put your concentrate.

just like I did for this one. https://www.youtube.com/watch?v=QKHPuRDn6JI

  • 32 months ago
  • 1 point

I thought about that too...hmmm we'll see cuz currently I have the Koolance non-conductive premix. It has all the inhibitors and the color I want already heard good things about Koolance liquids. have you ever dealt with them??

  • 32 months ago
  • 1 point

you can also fill your loop with distilled water, flush it, and fill it with the coolant you want :)

Also, don't forget the drain Valve. and if you are doing hardtubing, buy the Mansoon mandrell kit (blue one)

  • 32 months ago
  • 1 point

:NOEDIT

IT WORKED! I CALLED A FEATURE FOR ONCE!!

All seriousness though, congrats OP!

  • 30 months ago
  • 1 point

I Have another build on the way (August) You can also call it if you want :D

  • 32 months ago
  • 1 point

Could you please tell me how hard was it to put all the cutom parts together? I have the same case and it doesnt look like i could put a 420mm radiator on the bottom.

  • 32 months ago
  • 1 point

I really like the build, but can you post some more pics? It's basically 17 pics of the same shot.

  • 32 months ago
  • 1 point

Done :)

  • 32 months ago
  • 1 point

ahh man shoulda gone for a 1800 but thats okay. tht is a beast. Shgow tech source on you tube that ****

  • 32 months ago
  • 1 point

Cool!

Is the Mouse pictured from Mad Catz? Despite all the criticism, they always came up with amazing designs. It's a shame they went out of business recently.

  • 32 months ago
  • 1 point

The mad catz is my daily mouse, but for the picture, I put my Logitech G502

  • 32 months ago
  • 1 point

neat and wonderful !

  • 32 months ago
  • 1 point

You should enter setup wars :)

  • 32 months ago
  • 1 point

A lot of times when I see water cooled builds, it seems like some of the tubing is slightly out of alignment, or at a wonky angle. I honestly know nothing about this; is it safe? Does it affect stability?

+1 for the epic build m8

  • 32 months ago
  • 2 points

It's hard to achieve 100% perfect straight tubing. For this build I use PETG, PETG is flexible and can't shatter, so even if you have a little angle, it doesn't matter because you have 3 o-ring in your fitting. But, with acrylic, you need to have it straight cause it can shatter.

  • 32 months ago
  • 1 point

Thanks for the info!

  • 32 months ago
  • 1 point

A very attractive build. +1 for sure!

  • 32 months ago
  • 1 point

Wow, is the mobile any good? Thinking of getting it

  • 32 months ago
  • 1 point

mobile?

  • 32 months ago
  • 1 point

I meant mobo damn auto correct

  • 32 months ago
  • 1 point

By the way great build but heck of a lot of money you could of bought a car for that also can we have some temps?

  • 32 months ago
  • 1 point

Yeah, I love my motherboard :D

My car is already paid (2013 chevy cruze).

  • 32 months ago
  • 1 point

Haha

  • 32 months ago
  • 1 point

How much would this cost in American currency? Thinking of building a custom cooling loop and I was wondering what ballpark it would be in price wise.

  • 32 months ago
  • 1 point

Custom loop like this one: arround $1200USD.

  • 32 months ago
  • 1 point

ok thank you!

  • 32 months ago
  • 1 point

bro can you share which desk you are using for this build

  • 32 months ago
  • 1 point

Ikea Gerton :)

  • 32 months ago
  • 1 point

with adill legs

  • 32 months ago
  • 1 point

the cheapest one I think haha.

  • 32 months ago
  • 1 point

0/10: No AMD Radeon RAM or SSD

I'm just kidding, obviously (the RAM is DDR3). Great build and I hope you enjoy your shiny new computer!

  • 32 months ago
  • 1 point

Very nice build, but I would go with the AMD RYZEN 5 1600x as it is a teeny faster and better for budget gaming and desktop rather than workshop use (editing). Source of benchmarks and comparison: [REMOVED]

  • 32 months ago
  • 2 points

I'm doing both ;) and I have it overclocker to 3.9Ghz. It's enough for me :)

  • 32 months ago
  • 1 point

If you have another clean build, will you send it to me? I'm trying to make the best bang for my buck. :D Thanks

  • 32 months ago
  • 1 point

Please do not use link shorteners on our site. If you'd like to shorten a link on PCPartPicker, place the text you'd like others to read in brackets and the URL in parentheses, like so:

[Link to a page](http://www.pcpartpicker.com)

which will result in:

Link to a page

  • 32 months ago
  • 1 point

You didn't remove the link. Nvm you did

  • 32 months ago
  • 2 points

YEAH BOI STEP OFF SON ahem Thanks for checking!

  • 32 months ago
  • 1 point

All right, it's not like I'm going to IP Log someone with the following sites, grabify.link; blasze.tk; etc.; etc. I'm sorry if I have used goo.gl. Most people use that or bit.ly so I thought I should've used it too.

I'll try not to use goo.gl again (or other variants of link shorteners).

  • 32 months ago
  • 1 point

Why the 290X and not an RX 480? Hmm..

  • 32 months ago
  • 1 point

Because I have it since 2013 and the 480 is arround the same performance.

  • 32 months ago
  • 1 point

Mmk, love the build.

  • 32 months ago
  • 1 point

Cool as F**k

  • 31 months ago
  • 1 point

Thanks!

  • 31 months ago
  • 1 point

Greatest build ivé seen i long time, really nice work sir! If only the cable management cutout was positioned better the cables would look even better!

  • 31 months ago
  • 1 point

Thank you!

  • 31 months ago
  • 1 point

dat res tho. +1!

Can't find a single flaw in this build. Everything on point. Amazing pics too. Go(Oh) Canada!!!

  • 31 months ago
  • 1 point

Upon my research, i thought the inwin 303 only supported 120mm fans up top for a total of a 360mm. Those fans you have up there fill up the space a little more snuggly compared to other builds ive seen with similar fan layouts. Did you custom drill holes to fit them in? Or am i missing something?

  • 31 months ago
  • 2 points

Not at all, I just used the top 120mm row. I only have 3 screw.

  • 31 months ago
  • 1 point

Thanks! duly noted

  • 30 months ago
  • 1 point

Then why did you custom watercool it. Wouldnt it have been easier to use air cooling until vega came out. Anyway Amazing build. +1

  • 30 months ago
  • 1 point

Because I bought the GPU/waterblock 3 years ago and I just re-used it? I'll buy another one for Vega.

  • 30 months ago
  • 1 point

Ok that makes sense

  • 30 months ago
  • 1 point

Hey, cool build. What desk are you using?

  • 30 months ago
  • 1 point

Ikea Gerton

  • 30 months ago
  • 1 point

HEY! I know this is a bit late and rude of me to ask, but what are all the watercooling parts that you used?

  • 30 months ago
  • 1 point

Don't worry :)

Read the description again ;)

Or:

Watercooling & others:

  • Reservoir: Heatkiller 150DDC (with white plastidip)
  • Fan: Corsair ML120 & ML140
  • rad: 360mm darkside lp360
  • rad: alphacool NexXxos 420mm ST30
  • cpu block: EKWB Supremacy Evo
  • gpu block: EKWB
  • Cablemod magnetic RGB
  • Cablemod custom cable
  • Coolant: Mayhem Red Pastel
  • 30 months ago
  • 1 point

Sorry, forgot to read description. What a pleb. hehehehehhehe. Thanks a lot!

  • 25 months ago
  • 1 point

Can you OC your ram eh? just give it 1.35V and you can get like 2933mhz thats what i got atleast. btw where did you get your windows licence?

  • 25 months ago
  • 1 point

I dont have this computer anymore haha. For the windows license, I bought it from twed.com (i think the qebsite shut down)

  • 18 months ago
  • 1 point

Amazing build! +1

  • 12 months ago
  • 1 point

Beautiful build!

  • 11 months ago
  • 1 point

Thanks! stay tuned for my next build at the end of january

  • 32 months ago
  • 0 points

the blue front panel in win logo is disturbing me so badly

  • 32 months ago
  • 1 point

shhhhh. its okay.

  • 32 months ago
  • -1 points

Warplane, for the graphics card, I'm thinking about getting a GALAX 80NSJ6DHL2SN (GALAX GeForce GTX 1080 HOF) but it doesn't have Crossfire support, but SLI support. I'm only going to buy one of these cards but is Crossfire for dual, triple, or quad support? Will I need Crossfire support if it's only going to be one graphics card for my AMD RYZEN 5 1600x build and my X370 mobo? Thanks if you respond back. :D

  • 32 months ago
  • 2 points

Crossfire is for multiple AMD Graphic card

SLI is for multiple Nvidia Graphic card. If a motherboard have SLI support, it automatically have the Crossfire Support.

The B350 chipset have the crossfire and the X370 have the SLI and Crossfire.

Now, if you only have one card, you don't need to botter about this at all. So you can either choose a B350 or X370 motherboard (but keep in mind you can't have multiple Nvidia card with a b350 chipset if you want SLI in the future).

  • 32 months ago
  • 1 point

Ok, thanks. I will not be using SLI/Crossfire support on this build as it will be my first computer build. But I will keep in mind for a SLI/Crossfire support in the future. Thank you for the help and I hope to talk to you again on building other computers!

  • 32 months ago
  • 2 points

Anytime :)

[comment deleted]
[comment deleted]
[comment deleted]
  • 32 months ago
  • 1 point

There are already 2 radiators, a 360 & a 420, how is that not enough for cooling only 2 components?

  • 32 months ago
  • 1 point

its a joke about the 290x running super hot

  • 32 months ago
  • 1 point

Its really hard to convey inflection via text :-/

  • 32 months ago
  • 2 points

yeah...

  • 32 months ago
  • 1 point

Max temp of 57 degree, it's not that bad :p

  • 32 months ago
  • 1 point

nice

[comment deleted]
[comment deleted]
[comment deleted]
[comment deleted by staff]
  • 32 months ago
  • 1 point

Hahahaha :D

  • 32 months ago
  • 1 point

hahaha you nailed it :D

  • 32 months ago
  • 0 points

Im Canadian. I actually rich i have 3 polar bears and i live in a massive igloo. If i want to get to school faster i ride my 6 dog dog sled its luxorious. I hear other people that arent canadian drink waters and drive cars i could never do that.

[comment deleted by staff]
  • 32 months ago
  • 1 point

Yeah, my best one so far :)

[comment deleted by staff]
  • 32 months ago
  • 1 point

look at some of the highest rated featured builds, you'll find some

[comment deleted by staff]
[comment deleted by staff]
  • 32 months ago
  • 1 point

Yeah, I got an amazing deal from Amazon.

I also bought 2x16gb 2400mhz for $104CAD from Amazon in October 2016.

[comment deleted by staff]
[comment deleted by staff]
  • 32 months ago
  • 1 point

Nop, 1 ssd for the OS (NVMe), one for my download (and somes games), one for my games and I have a server of 12Tb RAID5 for my storage :)

[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]