Description

Here some my research how to cool 8700K @5 GHz in Lian Li OC Dynamic.

Log in to rate comments or to post a comment.

Comments

  • 15 months ago
  • 5 points

you are an artist sir. +1

  • 15 months ago
  • 3 points

After an endless stream of boring water coolers, this is a joy to see.

  • 15 months ago
  • 1 point

Pleasure to read this +)

  • 15 months ago
  • 3 points

You are amazing at building PCs. I am building my PC soon, and I hope I do as well of a job as you do

  • 15 months ago
  • 1 point

Thanks =)

  • 15 months ago
  • 2 points

very nice indeed

  • 15 months ago
  • 1 point

TNHX )+

  • 15 months ago
  • 2 points

First air cooled pc-o11 (I think)

Congrats!

  • 15 months ago
  • 1 point

Ahahaha =))))

  • 15 months ago
  • 2 points

This is so different and I seriously love it.

  • 15 months ago
  • 2 points

Nice =) Thanks=)

  • 15 months ago
  • 2 points

Hey! Very nice build! Looking to build my own o11 dynamic and had a quick question. Regarding the 140 fans on the bottom, did you end up just drilling mounting holes for them or were you able to test 120s here as well? Thanks :)

  • 15 months ago
  • 1 point

There is no my own build. I made it for client and this build no yet in my house. To mount 140 on the bottom I drilled case =) Here is my own build → https://pcpartpicker.com/user/Yolenzo/builds/#view=byZRsY

  • 13 months ago
  • 2 points

Забавный билд! Необычный! Как всегда - приятно посмотреть Ваши фото и работы! Сразу виден серьезный подход не только к подбору комплектующих, но и к эстетической составляющей! Если не секрет, где корпус заказывали в РФ? И не по этому билду, а вообще. Оплетение кабелей сами делаете? А, и что за материал используете, чтобы закрыть лишние отверстия для воздуха?

  • 13 months ago
  • 1 point

В РФ, я так понял его вообще не будут привозить. Я заказывал в Америке его, с доставкой вышло 20 000 рублей. Оплетение ручная работа. В данной сборке кабели родные от БП. Про материал не понял. можно нарисовать и примере какой-то фотки.

  • 13 months ago
  • 2 points

Понял, спасибо! Насчет материала - сзади у него есть вентиляция, грубо как под 80мм вентиляторы, но без отверстий для установки. У вас они закрыты чем-то белым.

  • 13 months ago
  • 1 point

Это винил белый карбоновый, которым тачки тюннингуют (=-)

  • 13 months ago
  • 2 points

Понял! :)

  • 15 months ago
  • 1 point

What did you use for this research ? Some kind of software or did you test all the possibilities on the case directly with fans ?

  • 15 months ago
  • 1 point

With stress test. LinX, Prime, Aida, CineBench, CPUz + render in Adobe Premiere.

  • 15 months ago
  • 1 point

quite a heatsink you got there

  • 15 months ago
  • 1 point

are those dark blue fans pulling in air or out?

  • 15 months ago
  • 1 point

or are the bottom ones exhaut and the top ones intake or vice-versa?

  • 15 months ago
  • 1 point

lmao

  • 15 months ago
  • 1 point

I am assuming you chose this motherboard because you knew you would run into VRM thermal issues. Wouldnt a higher end mother board with an 8phase or a properly doubled 4phase reduce the VRM temps enough to pass any stress test and perform well within spec. Furthermore the CPU cooler is an interesting choice I would be curious why you chose that one.

  • 15 months ago
  • 1 point

Did U saw my other builds?

  • 14 months ago
  • 1 point

I did but those parts are reused in a lot of them so I really couldnt come to any type of definitive conclusion hence me asking the question.

  • 14 months ago
  • 1 point

Couse in my builds VRM was stable. Only in this Case dynamic I met hot temps. So I mout 140mm Like in stock build to wind vrm =)

  • 15 months ago
  • 1 point

Thank you so much!! Would this hold 4 gpus comfortably....with proper cooling? Or at the least, 3 gpus? How would you recommend setting up cooling for it? I love this case and really want to make it work!! Do any fans come with this case? Love the experiments you did, thank you soo much.

  • 15 months ago
  • 1 point

This case not for 4 GPU air cooling. May be for 4 on watet but a don`t shute 100% this case is very exotic.

  • 15 months ago
  • 2 points

wait, but dont shute 100%? what do you mean by that? Do you think 3 gpus could be placed in here with budget watercooling options or with the 3 fans below?

  • 15 months ago
  • 1 point

Ouch. sorry for my english, I`m from Russia. shute = sure I miss correct word +)

2 GPU - HOT 3 GPU - Very hot (use fans with 2000 and high RPM) 4 GPU - unstable on air cooling (We talking about use consumer air cooling) you can use fans like sanyo denki with 10 or 15 000 RPM but this noise level blow up your brain, This Lian Li good for water cooling ang 2-3-4 GPU only in water. This case can`t stable work 2 or more GPU without water. See my other build in profile I use FD Define C.

  • 15 months ago
  • 2 points

Okk Thank you!!! So could you help me figure out what parts I would need to build 3-4 gpus with watercooling...or is the watercooling going to be very very expensive? Sorry im new to this, and you seem like you know what you are doing (I checked out your other builds). I will check that build out!

  • 15 months ago
  • 1 point

I`m so sorry but I make build and create configuration for build for money.

  • 14 months ago
  • 1 point

did the 140mm fans fit well and would there be room for an atx motherboard with the 140mm fans? also do you know if you could put 140mm fans on the side?

  • 14 months ago
  • 1 point

Sorry my Enlish in not good to understand u. Can u draw and show to me ur idea?

  • 14 months ago
  • 1 point

I want to put 4 of these fans in the case - https://ca.pcpartpicker.com/product/NQZ2FT/phanteks-case-fan-phf140hpwt2. they have screws 120mm apart, the fan is 140mm long. will 2 fit on bottom and 2 fit on the side without drilling holes?

  • 14 months ago
  • 1 point

Do u have a Skype?

[comment deleted]
  • 14 months ago
  • 1 point

=DDDDDD Wow That way the way of the year =) Now I see all in the Wold +) Well There no way to see this pic. U just pasted way of distenatioin on ur PC. U must upload pic via web service like this https://imgur.com than give me the link.

  • 14 months ago
  • 1 point

damn im stupid hahaha, here - https://imgur.com/a/1SqWtYv And no i don't have skype.

  • 13 months ago
  • 1 point

Hey man, love the black and white theme! What are the temps like for the cpu and gpu? Were they overclocked at all? Thanks!

  • 13 months ago
  • 1 point

CPU 72 GPU don`t remember it build for client

  • 8 months ago
  • 1 point

How were you able to mount the front fan the way that you did/what is that bracket? Also does the cooler overhang the ram as such they aren't visible?