Description

My original plan was to build this in a be quiet! 900 Pro case. It got lost in shipping and so I though I would shop local and see what was available. I came across the Core P3 and thought this would be kinda cool and if I didn't like it I could always rebuild the system into a new case later. I mean...who wouldn't want to build two computers? Realizing that I didn't have a lot of desk space and got the smallest room in our new house for my office I decided to build and keep this system that fit the space better. I am still getting used to my PC hanging on the wall. For being an open air setup it is super quiet. The PSU is completely inaudible with a Silent Wings 3 fan inside and I don't hear the Corsair ML fans until they are well over 1100rpm.

Because the Core P3 case (chassis really) doesn't support eATX motherboards I used some thick spacers behind the AIO to create a gap to pull cables through and you cant even tell. I kinda like that absence of empty space you find in many cases. I now have all my hard line water loop parts I planned to use sitting in a box while I figure out how/if I can do it on this and hang it on the wall.

UPDATE - I really appreciate all the nice comments. I thought the build was kinda...meh. It has convinced me to really do more with it even though I call it "completed". And in time I will update with new pictures. I think I have the water cooling sorted but I will need to fabricate a few things first to get that done. I started building PC's in the mid to late 80's. Well, it was just assembling them really. Sometimes just painting the beige cases black was a mod in itself. I remember putting a hook on the side of a computer for my beeper, haha! I have not done a build since 2010 and I have really enjoyed doing this again. Again, thanks for the good words!!!

Comments

  • 7 months ago
  • 6 points

Great looking build, would love more pictures.

  • 7 months ago
  • 1 point

Thanks! I will get more posted soon.

  • 7 months ago
  • 1 point

Got some more pics up. I am clearly not the photographer that some people are.

  • 7 months ago
  • 4 points

PC PC On the Wall Who’s got the best hanging PC of them all?

+1

I know there are many larger wall PCs, but I can’t build something like this anyways, so they’ll always impress me.

  • 7 months ago
  • 3 points

I saw many Core P3 builds and i must say that this one looks the best so far... You have some really amazing parts in there too.

  • 7 months ago
  • 2 points

Thanks. I'm working on a water loop solution and think I have it figured out. Not much space on that P3.

  • 7 months ago
  • 3 points

You may not be a photographer as you say but you look like an electrician magician! Where are those wires!? FEATURE ALERT!

  • 7 months ago
  • 2 points

Challenge: Cram it into a micro itx case

  • 7 months ago
  • 2 points

vans motto: off the wall

I disagree now.

Great build!

  • 7 months ago
  • 1 point
  • 7 months ago
  • 1 point

cool

  • 7 months ago
  • 1 point

Nice build! Using a room/wall as a "case" goes beyond a server rack lol. Throw the ceiling fan on high and you have "fans" for your "case". Better yet, you could throw an AC Unit in the room and make it a state of the art database room lol.

  • 7 months ago
  • 1 point

I actually have the AC vent blowing on it. I have even seen the CPU package at 20°C at idle! The problem is that every time the air comes on I feel like I'm in a GoT episode. So I have to keep the vent closed when I'm in there.

  • 7 months ago
  • 1 point

Lol. I would bet it feels like an GoT episode, especially if it's not a very big room. You may have problems if you ever use the heat in your house. I guess it depends on where you live and the climate.

  • 7 months ago
  • 1 point

You should make this a RGB overkill, It would look amazing

  • 7 months ago
  • 1 point

That looks pretty cool. I bet cooling is great.

  • 7 months ago
  • 1 point

I love this build great rig u got there enjoy it

  • 7 months ago
  • 1 point

Looks amazing! Love the clean cable work.

  • 7 months ago
  • 1 point

Holy smokes!! That build is FEATURE worthy!!! Be sure to include a nighttime pic so we can drink in the RGB.

  • 7 months ago
  • 2 points

You got it. I added some more pics. Just remember that I am not a photographer.

  • 7 months ago
  • 1 point

I guess you have to have wireless peripherals or it would look ugly lol.

  • 7 months ago
  • 1 point

Actually only my trackball mouse is wireless. All the other cables are run inside the wall and come out just under the desk. When I use a wired mouse I plug it into the hub built into the monitor. I did have the cables hanging at first and you are correct...looked super ugly.

  • 7 months ago
  • 1 point

Well that is super ba. What mounting brackets did you use? I'd be scared ****less to put that much gear on my wall! Awesome stuff.

  • 7 months ago
  • 3 points

I used a TV wall mount bracket. Bolted it into wall studs with the largest bolts that would fit and four weird drywall anchors that are supposed told over 200lbs each. I was able to hang from it (190lbs) and it didn't even flinch.

  • 7 months ago
  • 1 point

I might have to mess around with this. It looks 2 cool

  • 7 months ago
  • 1 point

This looks awesome!

  • 7 months ago
  • 1 point

really sexy SLI

  • 7 months ago
  • 1 point

Wow!!! I did not expect to get featured. Thanks!!!!!

  • 7 months ago
  • 1 point

this thing is epic!

  • 7 months ago
  • 1 point

Must be nice to have all the money in the world lol.

  • 7 months ago
  • 1 point

Well, I used to before this!

  • 7 months ago
  • 1 point

I knew your build would get a feature. Congrats!

Also, what are you using this build for? Gaming, programming etc?

  • 7 months ago
  • 1 point

It's primarily my gaming computer. But it makes its way around the internet pretty good too.

  • 7 months ago
  • 1 point

It should make its way around the Internet with 80 tabs openly easily lol.

  • 7 months ago
  • 1 point

Jase33, congratulations. This is an incredible build, I am floored at the cleanliness and the execution behind (the wall) this setup.

Welllllllllllllllll done! +1

  • 7 months ago
  • 1 point

PC PC on the wall, who is the brokest of them all?

  • 7 months ago
  • 1 point

Wow the only time I like the look of a CPU sticker. Amazing job on the build!

  • 7 months ago
  • 1 point

very creative

  • 7 months ago
  • 1 point

I am very suprised that you were able to get the Godlike on Thermaltake Core that isn't the P7. I'm liking the whole Platinum build. Why did you go with the Godlike over the Ace?

  • 7 months ago
  • 1 point

I decided on the Godlike for a few reasons. I mainly liked the number of headers for USB, fans, RGB, etc. since this was originally going into a full tower. Also, the debug LCD is nice. The VRM is good, not the best out there, but good enough for me. Also, I read or heard that the ACE had issues supporting SLI or only supported XFire. Don't know if that's true but SLI being what it is I didn't want to take the chance. At the end of the day it was between this and the Aorus Master and I liked the look of this better.

  • 7 months ago
  • 1 point

Even if the Ace had trouble with NVLink SLI/Crossfire (it doesn’t) the new DirectX12 is killing off multi-GPU support.

The Gigabyte Master of VRMs would’ve been a better choice (VRM design, overclocking and Form factor) but I do understand why some few individuals would go with the Godlike.

  • 7 months ago
  • 1 point

I love the silver, black and blue. And good choice of parts... except what are you playing that could possibly benefit from having 2080ti sli rather than one?

  • 7 months ago
  • 1 point

Very ambitious build and congrats on the feature! My only concern is how you would keep dust from accumulating since it's an open frame and you mentioned your AC vent is blowing on it. Hope this PC will last you for many years!

  • 7 months ago
  • 1 point

We have a very good a/c and dust filtration system and get minimal dust settling in the house. So far I have seen very little to almost no dust on it at all. But when I do notice some dust it will be super easy to wipe down.

  • 7 months ago
  • 1 point

the first thing that I noticed was the Star Wars poster to the left

  • 7 months ago
  • 1 point

So clean, beautiful build! Excited to see the water cooling update!

  • 7 months ago
  • 1 point

Your cable management is clean. In fact it is so clean that I wonder where your cables are. (Serious question, where are they??)

  • 7 months ago
  • 1 point

Ha...the cables run behind the chassis and into the wall. They drop down and come out under the desk.

  • 7 months ago
  • 1 point

I see. Deft extra props on that.

  • 7 months ago
  • 1 point

Wow. This is gorgeous.

  • 7 months ago
  • 1 point

500mm fan overhead for max airflow

  • 7 months ago
  • 1 point

That would be something! It might even be enough to max airflow on me sitting under it.

  • 7 months ago
  • 1 point

+1 for the positive vibes and UPDATE!

  • 7 months ago
  • 1 point

Awesome build! I'd like to see how you routed your cables!+1

  • 7 months ago
  • 1 point

Man is this awesome, wall mounting a build is a new goal

  • 7 months ago
  • 1 point

I love how all the blue and white tie in =D Btw, what desk is in the pictures?

  • 7 months ago
  • 1 point

It's an Arozzi Arena

  • 7 months ago
  • 1 point

Ah thanks! =D

  • 7 months ago
  • 1 point

What is that mouse kappa

  • 7 months ago
  • 1 point

Logitech MX ERGO.

  • 7 months ago
  • 1 point

Superb build. Congrats on the feature. +1

  • 7 months ago
  • 1 point

Love The Corsair ML Fans!!!

  • 7 months ago
  • 1 point

What games do you play to need 2x 2080Ti ? Also, sadly you get bottlenecked with dual 2080Ti paired with a 9900K but there are no other processors that are move powerful except threadripper or going core X series, also here’s the calculator for the bottleneck: https://pc-builds.com/calculator/Core_i9-9900K/GeForce_RTX_2080_Ti/0RM12nlv/ wich calculates about 16% of bottleneck

  • 7 months ago
  • 1 point

You got me curious, what exactly do you use this beautiful beast for ?

  • 7 months ago
  • 1 point

Anything and everything.

  • 7 months ago
  • 1 point

But can it make a peanut butter and jelly sandwich?

  • 6 months ago
  • 2 points

It did last night :|

  • 6 months ago
  • 1 point

wOW man, Great Work dude, you have found the courage that I'm lacking to build in an open case I bet my life that cable management was beyond hell in such a build. hats off

  • 6 months ago
  • 1 point

Beautiful!

  • 6 months ago
  • 1 point

NIICE, I really like the RGB FE graphics cards! +1 for the effort and dedication.

  • 6 months ago
  • 1 point

Which cables did u use

  • 6 months ago
  • 1 point

I took some cables from an old PSU, sleeved them and made extensions myself. I got the PET sleeving from Mainframe Customs and the cable combs from Amazon.

  • 6 months ago
  • 1 point

Nice job with cable management, can't see a single wire connected from the rig to the monitor. If you don't mind me asking, what cable extensions are you using?

  • 6 months ago
  • 1 point

If you mean the power supply cables, I sleeved an old set myself. I googled some simple cable designs and picked one. I used Telios sleeving from Mainframe Customs.

  • 6 months ago
  • 1 point

I want to do a build using this case, but unsure about having my GPU SLI on it. Do you have any natural GPU sag, and if so how did you deal with it? I can't seem to see any in your build.

  • 6 months ago
  • 1 point

No GPU sag at all. When I put the top card in I lifted the back corner and tightened the slot screw. Then I put in the second card, installed the NVL bridge and tightened the slot screw. The motherboard also has reinforced pcie slots.

  • 3 months ago
  • 1 point

I can just imagine the room heating up

  • 2 months ago
  • 1 point

Beautiful build. Can you tell me what size those washers are?

  • 2 months ago
  • 1 point

They are a hair bigger than 7/16"

  • 2 months ago
  • 1 point

Love this build, creative, powerful, pretty rgb, nice job man props on the wall mounting man. +1

  • 1 month ago
  • 1 point

Hello, I have to say a very clean and beefy build. Amazing job on cable management. I was thinking of using a Core P3 as well and wall mount it to free up desk space. How did you mount yours?

  • 7 months ago
  • 0 points

This setup looks awesome the symmetry is on point with both the speakers and headphones + tablet offseting each other. Cmon now, you must watch Techsource ( ͡° ͜ʖ ͡°)

[comment deleted]
  • 7 months ago
  • 3 points

We have a super filtration system in our A/C system due to allergies. Very little dust if any. It's been up for a over a week and I haven't seen a spec on it yet.

[comment deleted]
[comment deleted]
  • 7 months ago
  • 1 point

They are so high the site can't see them. Lol. Actually, the prices are not listed in the part picker so it doesn't show up here.

  • 7 months ago
  • 1 point

If you choose to, there's an option to add purchase price manually using the gear symbol next to where the price would normally display.

  • 7 months ago
  • 1 point

I see that now. I will try and get it updated today. Thanks

[comment deleted]
[comment deleted by staff]
  • 7 months ago
  • 1 point

It's the same RAM. Just has the Corsair light bars on top.

[comment deleted by staff]