Description

Mostly using it for gaming it's a beast it runs everything maxed no problems that i have thrown at it and get great temps all and all very happy with it

Log in to rate comments or to post a comment.

Comments

  • 64 months ago
  • 1 point

That window mod looks awesome : O

+1 from me

  • 64 months ago
  • 1 point

This looks pretty amazing!

  • 64 months ago
  • 1 point

Wow Awesome outstanding build!!!!!!!!!!!!

If I may ask, what is that red and black NZXT panel???

Just totally awesome build!!!!!!!!!!

  • 64 months ago
  • 1 point

I made it out of a piece of acrylic left over from side panel window. pretty much had nzxt logo vinyl made. stuck it to back side of acrylic painted over it peeled up vinyl witch left logo clear then used red cellophane wrapping paper got from hobbie shop and back lit it with cold cathodes

  • 63 months ago
  • 1 point

How did you mount it?

  • 63 months ago
  • 1 point

with double sided type kind of ghetto but it works

  • 64 months ago
  • 1 point

Great build and looks pretty awesome.

  • 64 months ago
  • 1 point

Man I don't know why this hasn't got more up votes .... Maybe you posted at an inopportune time or maybe people don't click unless they see super sli crossfire 980ti water cooling fire breathing pixel Pygmy . Seriously though super clean lots of thought gone into it and the mods are great plus 1 man bravo!!!!!!

  • 64 months ago
  • 1 point

if that computer was a girl, i would wife datttt

  • 63 months ago
  • 1 point

+1 clean build with best cable management ever

  • 62 months ago
  • 1 point

Nice build my friend. Like the window mod as well. I mod mine too.

  • 61 months ago
  • 1 point

why does this case needs case fans? isn't it has good airflow?

  • 61 months ago
  • 1 point

All the fans in the case are mounted to radiator

  • 60 months ago
  • 1 point

I have a very similar build compared to yours, and now I am finally interested in case modding and aesthetics. I have looked everywhere for a method in making the side window with a larger window, basically the same way you have made yours. Did you mod the side panel yourself? If so, is there an easy way in how to do this? I absolutely love the way the side window looks with the 530 but the stock case comes with the awkward window.

  • 59 months ago
  • 4 points

Yes I did myself first you need masking tape, long straight peace of metal or and ruler/straight edge (for making lines to cut out window straight), a jig saw with a Bi-metal blade 18-20 TPI(teeth per inch), metal file, a sheet of acrylic , and strong double sided tape. You will need to go to performance PC and get 7-8 feet of rubber U channel window molding/edging. First mask the panel and double or triple mask it due to the jig saw vibrating the feet of the jig saw can rip thur tape causing a scratch in panel. Then trace out window just make a big square. Then use something round I.e. Socket or spray paint can to curve corners. Then take your factory panel window out if you haven't done this yet and use the window hole as a start point for the saw, now carefully cut along the line you made and take your time let the saw do the work. The nice thing about a jig saw is the blade will curve around the corners. After you have cut out the hole, take your file and smooth out your edges and try to straighten out the straight lines as much as possible (does not have to be perfect) install u channel molding around edge of cutout and look at it form a distance. See if line look straight you're done there. Now cut you acrylic to a square shape that covers the back of hole with and an inch of over hang on each side of the hole. Now take two pieces of double side tape half inch and put them on the outer most edge on opposite sides and tape to the inside panel once it is secure. Test fit panel and make sure panel fits with no problem. If it doesn't trim acrylic accordingly when penal fit good and close with no problems peel window off and apply as much tape around edges as you can you want it to stay there forever and you're done. Wish I had pic of the process, but I don't. Hope this helps.

  • 57 months ago
  • 1 point

Goodness that is a clean build.

[comment deleted]
  • 64 months ago
  • 1 point

This is my second pc I have biult. First one had a i5 and a r9 270. More of a budget biuld then a gaming rig IMHO that's why it's my first "legit" gaming rig. Ive been working on it for 5-6 months.

[comment deleted]
  • 64 months ago
  • 1 point

But thank you for the compliment and sorry if I came across as rude it was not my intention and the tutorial I actually don't have any extra side panels or cases to perform it on

[comment deleted]
[comment deleted]