Description

This is a build for 1440p 144hz gaming and Vray rendering. The system is performing as expected. Good: CPU easily overclocked to 5GHz (with 1.32V in BIOS and LV6 Load-Line Calibration). GPU self overclocked to 1950MHz. You can go up to 2050MHz if you can stand the louder fan noise. Relatively quiet when under load. Bad: Case not designed for E-ATX motherboard. You cannot do the push/pull configuration on the radiator unless you want to give up cable management on the right side of the motherboard. Lighting can't be controlled by a single software (Maybe it's my fault not going with all Asus or all MSI components). GPU idle temp too high. The fan does not spin under 60°C.

Log in to rate comments or to post a comment.

Comments

  • 9 months ago
  • 3 points

Why do you have the rog (stickers) on the msi card?

  • 9 months ago
  • 1 point

Just for fun haha

  • 9 months ago
  • 1 point

Ah alright just was wondering looks good tho

  • 9 months ago
  • 3 points

Username checks out

  • 9 months ago
  • 1 point

lol

  • 9 months ago
  • 2 points

That build looks very pretty. Especially the GPU.

  • 9 months ago
  • 1 point

thank you

  • 9 months ago
  • 2 points

I so love that case, but the fans would have broke my budget...let alone the case.
I would have 360 rad'd the side. Kraken style of course.
Noctua bile browns should never be seen.... 1 up for same tastes!

  • 9 months ago
  • 2 points

the brown is hidden on the back

  • 9 months ago
  • 2 points

Lovely, I am awaiting my case (black) this week, I'm happy to see it's a popular case this time around!

  • 9 months ago
  • 2 points

I getting the same motherboard as you

  • 9 months ago
  • 1 point

Great

  • 9 months ago
  • 2 points

How much you get drop of CPU's temp, when changed aio fans from stock to Noctua A12x25?

  • 9 months ago
  • 1 point

I didn't measure the before & after temp because I never used the stock fan.

  • 9 months ago
  • 2 points

Very nice build! What kind of monitor/keyboard are you using?

  • 9 months ago
  • 1 point

As listed on the left, I am using Acer XB271HU and Realforce R2

  • 9 months ago
  • 2 points

I kind of figured the O11 wouldn't be able to properly fit a Asus Maximus Extreme even though it was designed with EATX in mind. The PCB layout in contrast to the EVGA Dark is inferior.

Razer Synapse only controls the case LEDs for the case that I was aware that the only motherboards that can control the all lighting is ASRock and MSI motherboards on THEIR dedicated rgb software.

I can't quite figure out why you have a thermal issues maybe you'll need a dedicated fan controller like the Aquacomputer QUADRO. That's worth getting a look into.

Hope you get those issues resolved.

  • 8 months ago
  • 1 point

Very nice build! Just a question. If I put fans on the side panel where your rad is will the e-atx motherboard overlap the fans if you look straight at it? Or will you be able to see the fans clearly ?

  • 7 months ago
  • 1 point

You can look straight at it.

  • 3 months ago
  • 1 point

Though looking at other similar builds I have noticed that the power cable will always obscure the view to the fans a bit - but that should not be an issue for airflow, more so trigger some ppls ocd :)